Low Nickel 444 Stainless Channel Section
C-channel section of 444 ferritic stainless (<0.5% nickel), 100 mm height x 5 mm thick (max 105 mm cross-section). Under HTS 7222.30.00.22 for low-nickel stainless shapes <152.4 mm.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If U-sections over 152.4 mm
Larger U/I/H sections have size-specific headings.
If ball-bearing steel per Note (h)
Strict element specs for ball-bearing steel classify differently.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide section modulus drawings if complex shape; ensure uniform composition across heat; segregate from austenitic grades
Related Products under HTS 7222.30.00.22
Ferritic 430F Stainless Steel Rod
Free-machining 430F ferritic stainless rod (<0.5% nickel), 15 mm diameter. HTS 7222.30.00.22 for low-nickel stainless rods under 152.4 mm cross-section, hot-rolled condition.
AISI 420 Stainless Steel Flat Stock
AISI 420 martensitic stainless flat bar (<1% nickel), 3 mm x 100 mm (max cross 100 mm). Fits HTS 7222.30.00.22 as other low-nickel stainless bars under 152.4 mm, not further worked.
Stainless 441 Grade Round Bar 35mm
Automotive grade 441 stainless steel round bar (<0.5% nickel), 35 mm diameter. HTS 7222.30.00.22 covers such stainless bars with max cross-section under 152.4 mm and low nickel.
AISI 410 Stainless Steel Angle Section
L-shaped angle section of AISI 410 martensitic stainless steel (<0.5% nickel), 50x50x5 mm (max cross-section 55 mm). Under HTS 7222.30.00.22 as other stainless steel sections with low nickel, under 152.4 mm.
AISI 304 Stainless Steel Round Bar
A round bar made from AISI 304 stainless steel, containing approximately 2% nickel by weight and with a diameter of 25 mm (less than 152.4 mm cross-section). Classified under HTS 7222.30.00.22 as other bars and rods of stainless steel with less than 8% nickel. Not further worked beyond basic hot-rolling.
430 Stainless Steel Flat Bar 1x50mm
Flat bar of 430 grade stainless steel (ferritic, <0.5% nickel) with 1 mm thickness and 50 mm width, maximum cross-section 50 mm. Fits HTS 7222.30.00.22 for other stainless steel bars under 152.4 mm with less than 8% nickel. Hot-rolled without additional surface treatments.