AISI 304 Stainless Steel Round Bar
A round bar made from AISI 304 stainless steel, containing approximately 2% nickel by weight and with a diameter of 25 mm (less than 152.4 mm cross-section). Classified under HTS 7222.30.00.22 as other bars and rods of stainless steel with less than 8% nickel. Not further worked beyond basic hot-rolling.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If polished or further worked
Further worked stainless steel bars (polishing, coating) fall under the 'further worked' subheading per Chapter 72 notes.
If not stainless steel
Bars without minimum chromium for stainless steel classification go to Chapter 72 iron/steel bars.
If containing 8% or more nickel
Higher nickel alloy stainless bars are classified separately from low-nickel stainless steel.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain mill test certificate confirming nickel content below 8% and exact dimensions; declare cross-sectional dimension accurately to avoid reclassification; check for any further working like polishing which moves to 7222.30.00.70
Related Products under HTS 7222.30.00.22
Ferritic 430F Stainless Steel Rod
Free-machining 430F ferritic stainless rod (<0.5% nickel), 15 mm diameter. HTS 7222.30.00.22 for low-nickel stainless rods under 152.4 mm cross-section, hot-rolled condition.
AISI 420 Stainless Steel Flat Stock
AISI 420 martensitic stainless flat bar (<1% nickel), 3 mm x 100 mm (max cross 100 mm). Fits HTS 7222.30.00.22 as other low-nickel stainless bars under 152.4 mm, not further worked.
Stainless 441 Grade Round Bar 35mm
Automotive grade 441 stainless steel round bar (<0.5% nickel), 35 mm diameter. HTS 7222.30.00.22 covers such stainless bars with max cross-section under 152.4 mm and low nickel.
Low Nickel 444 Stainless Channel Section
C-channel section of 444 ferritic stainless (<0.5% nickel), 100 mm height x 5 mm thick (max 105 mm cross-section). Under HTS 7222.30.00.22 for low-nickel stainless shapes <152.4 mm.
AISI 410 Stainless Steel Angle Section
L-shaped angle section of AISI 410 martensitic stainless steel (<0.5% nickel), 50x50x5 mm (max cross-section 55 mm). Under HTS 7222.30.00.22 as other stainless steel sections with low nickel, under 152.4 mm.
430 Stainless Steel Flat Bar 1x50mm
Flat bar of 430 grade stainless steel (ferritic, <0.5% nickel) with 1 mm thickness and 50 mm width, maximum cross-section 50 mm. Fits HTS 7222.30.00.22 for other stainless steel bars under 152.4 mm with less than 8% nickel. Hot-rolled without additional surface treatments.