Precision Ground 409 Stainless Rod 8mm Diameter
Cold-finished 409 stainless steel rod with 8 mm round cross-section and <8% nickel, designed for exhaust system components. Falls under HTS 7222.20.0041 as cold-formed stainless bars not exceeding 18 mm diameter. Provides heat resistance for automotive applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If hot-rolled with circular cross-section under 18 mm
Processing stage (hot-rolled vs cold-finished) separates headings 7222.11 from 7222.20 for stainless bars.
If high-strength steel per Chapter 72 note (a)
Products meeting high-strength steel criteria (yield point specs) are classified in 7210 regardless of stainless properties.
If imported as parts of engines rather than bar stock
End-use as specific machinery parts in Chapter 84 supersedes material form classification.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Ensure no grinding beyond cold-finishing tolerances to avoid 'further worked' status; include dimensional inspection reports
• Certify exact nickel percentage as mills vary in 409 formulations
Related Products under HTS 7222.20.00.41
443 Stainless Cold Bar 12.8mm Circular
Automotive 443 stainless cold bar, 12.8 mm dia., <8% Ni for trim. HTS 7222.20.0041 stainless rod. ESR refined.
Cold-Drawn 304 Stainless Tie Bar 16.9mm
16.9 mm 304 stainless tie bar stock, cold-drawn <8% Ni for concrete forms. HTS 7222.20.0041. General corrosion resistance.
439LF Stainless Steel Cold Rod 17mm Diameter
Low-ferrite 439LF stainless cold rod, 17 mm round, <8% Ni for exhaust manifolds. HTS 7222.20.0041 for cold-finished stainless bars this size. Optimized weldability.
301 Full Hard Cold-Rolled Bar 10.5mm
Full hard condition 301 stainless bar, 10.5 mm dia., cold-rolled <8% Ni for springs. HTS 7222.20.0041 cold-finished stainless rod. High tensile strength.
Cold-Finished 304 Stainless Steel Round Bar 10mm
A cold-finished round bar of 304 stainless steel with a 10 mm diameter and less than 8% nickel content, not further worked beyond cold-forming. This falls under HTS 7222.20.0041 due to its circular cross-section under 18 mm, stainless steel composition, and minimal nickel. Commonly used in precision mechanical applications requiring corrosion resistance.
420 Stainless Cold-Finished Dowel Rod 14mm
14 mm 420 martensitic stainless dowel rod, cold-finished <8% Ni for hardened pins. HTS 7222.20.0041 small stainless bar. Corrosion resistant when hardened.