Martensitic 410 Stainless Rod 13mm Cold-Finished
13 mm cold-finished martensitic 410 stainless rod, <8% Ni, for pump shafts and valves. HTS 7222.20.0041 specifies these low-Ni, small-diameter stainless bars cold-formed only. Heat-treatable for hardness.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If cross-section is non-circular (e.g., D-shape)
Cross-sectional geometry splits 7222.20 into circular vs other shapes.
If non-stainless martensitic alloy steel
Material basis (stainless vs alloy) separates Chapters 72 headings.
If pre-formed for valve components
Semi-finished parts for taps/valves classified by function in 8481.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Mill test report must show 410 grade chemistry; no edge milling allowed without further-worked status
• Calculate duties on gross weight including strapping
Related Products under HTS 7222.20.00.41
443 Stainless Cold Bar 12.8mm Circular
Automotive 443 stainless cold bar, 12.8 mm dia., <8% Ni for trim. HTS 7222.20.0041 stainless rod. ESR refined.
Cold-Drawn 304 Stainless Tie Bar 16.9mm
16.9 mm 304 stainless tie bar stock, cold-drawn <8% Ni for concrete forms. HTS 7222.20.0041. General corrosion resistance.
439LF Stainless Steel Cold Rod 17mm Diameter
Low-ferrite 439LF stainless cold rod, 17 mm round, <8% Ni for exhaust manifolds. HTS 7222.20.0041 for cold-finished stainless bars this size. Optimized weldability.
301 Full Hard Cold-Rolled Bar 10.5mm
Full hard condition 301 stainless bar, 10.5 mm dia., cold-rolled <8% Ni for springs. HTS 7222.20.0041 cold-finished stainless rod. High tensile strength.
Cold-Finished 304 Stainless Steel Round Bar 10mm
A cold-finished round bar of 304 stainless steel with a 10 mm diameter and less than 8% nickel content, not further worked beyond cold-forming. This falls under HTS 7222.20.0041 due to its circular cross-section under 18 mm, stainless steel composition, and minimal nickel. Commonly used in precision mechanical applications requiring corrosion resistance.
420 Stainless Cold-Finished Dowel Rod 14mm
14 mm 420 martensitic stainless dowel rod, cold-finished <8% Ni for hardened pins. HTS 7222.20.0041 small stainless bar. Corrosion resistant when hardened.