AISI 321 Stainless Cold-Rolled Band 0.3mm Thick
Cold-rolled stainless band of AISI 321 (titanium stabilized), 150 mm width, 0.3 mm thickness, ~9-12% nickel. Matches HTS 7220.20.70.15 for <300 mm wide, >0.25 mm thick stainless with high nickel, no further working. Suited for automotive exhaust components.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If further worked than cold-rolled (e.g., annealed)
Certain heat treatments beyond cold-rolling may qualify as further worked per Chapter notes.
If hot-rolled instead of cold-rolled
Hot-rolled stainless flat products precede cold-rolled in HTS Chapter 72 sequence.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include titanium content in certs for 321 grade verification within stainless parameters
• Verify thickness >0.25 mm exactly; ≤0.25 mm uses 7220.20.70.30
• Ship in protective atmospheres to avoid oxidation claims denial
Related Products under HTS 7220.20.70.15
AISI 304 Stainless Steel Cold-Rolled Strip 0.5mm Thick
Cold-rolled flat-rolled stainless steel strip of AISI 304 grade, width 250 mm, thickness 0.5 mm, containing approximately 8-10.5% nickel and 18-20% chromium. Not further worked beyond cold-rolling, this product falls under HTS 7220.20.70.15 due to its stainless steel composition, width under 300 mm, thickness between 0.25 mm and 1.25 mm, and nickel content over 0.5%. Commonly used for precision stamping in appliance manufacturing.
316L Stainless Steel Cold-Reduced Sheet 1.0mm Thick
Cold-reduced stainless steel sheet of 316L grade, 280 mm width, 1.0 mm thickness, with 10-14% nickel and 16-18% chromium plus molybdenum. Classified under HTS 7220.20.70.15 for cold-rolled stainless products under 300 mm wide, 0.25-1.25 mm thick, and >0.5% nickel, without further working. Ideal for chemical processing equipment components.
Monel 400 Alloy Cold-Rolled Strip 0.8mm Thick
Cold-rolled strip of Monel 400 nickel-copper alloy (approx. 63% nickel, stainless due to chromium content), 200 mm width, 0.8 mm thick. Fits HTS 7220.20.70.15 as stainless flat-rolled product <300 mm wide, 0.25-1.25 mm thick, >0.5% nickel, not further worked. Used in marine and chemical applications.
Duplex 2205 Stainless Cold-Reduced Foil 1.2mm Thick
Cold-reduced duplex 2205 stainless steel foil/sheet, 290 mm width, 1.2 mm thick, 4.5-6.5% nickel, high chromium. Under HTS 7220.20.70.15 as cold-rolled stainless <300 mm wide, thickness 0.25-1.25 mm, >0.5% Ni, not further worked. For oil & gas structural parts.