316L Stainless Steel Cold-Reduced Sheet 1.0mm Thick
Cold-reduced stainless steel sheet of 316L grade, 280 mm width, 1.0 mm thickness, with 10-14% nickel and 16-18% chromium plus molybdenum. Classified under HTS 7220.20.70.15 for cold-rolled stainless products under 300 mm wide, 0.25-1.25 mm thick, and >0.5% nickel, without further working. Ideal for chemical processing equipment components.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If width ≥300 mm but <600 mm
Same thickness and nickel specs but wider dimension moves to the next width band in cold-rolled stainless.
If clad or coated with other metals/nonmetals
Cladding constitutes 'further worked' per Chapter 72 notes, shifting from not-further-worked category.
If in coils rather than cut-to-length
Coiled stainless bars/rods of similar dimensions classify under Chapter 72 rod headings, not flat-rolled.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide detailed alloy certification (e.g
• 316L specs) to verify nickel and chromium levels meeting stainless criteria
• Declare exact dimensions on entry docs; width ≥300 mm but <600 mm would shift to 7220.20.90 subheading
• Use protective oils or films during shipping to minimize rust risks, as no duty allowance for pre-entry discoloration
Related Products under HTS 7220.20.70.15
AISI 304 Stainless Steel Cold-Rolled Strip 0.5mm Thick
Cold-rolled flat-rolled stainless steel strip of AISI 304 grade, width 250 mm, thickness 0.5 mm, containing approximately 8-10.5% nickel and 18-20% chromium. Not further worked beyond cold-rolling, this product falls under HTS 7220.20.70.15 due to its stainless steel composition, width under 300 mm, thickness between 0.25 mm and 1.25 mm, and nickel content over 0.5%. Commonly used for precision stamping in appliance manufacturing.
Monel 400 Alloy Cold-Rolled Strip 0.8mm Thick
Cold-rolled strip of Monel 400 nickel-copper alloy (approx. 63% nickel, stainless due to chromium content), 200 mm width, 0.8 mm thick. Fits HTS 7220.20.70.15 as stainless flat-rolled product <300 mm wide, 0.25-1.25 mm thick, >0.5% nickel, not further worked. Used in marine and chemical applications.
AISI 321 Stainless Cold-Rolled Band 0.3mm Thick
Cold-rolled stainless band of AISI 321 (titanium stabilized), 150 mm width, 0.3 mm thickness, ~9-12% nickel. Matches HTS 7220.20.70.15 for <300 mm wide, >0.25 mm thick stainless with high nickel, no further working. Suited for automotive exhaust components.
Duplex 2205 Stainless Cold-Reduced Foil 1.2mm Thick
Cold-reduced duplex 2205 stainless steel foil/sheet, 290 mm width, 1.2 mm thick, 4.5-6.5% nickel, high chromium. Under HTS 7220.20.70.15 as cold-rolled stainless <300 mm wide, thickness 0.25-1.25 mm, >0.5% Ni, not further worked. For oil & gas structural parts.