Alloy 904L Stainless Steel Cold-Rolled Foil Alternative
904L super-austenitic stainless steel cold-rolled strip (thicker variant), 290 mm width, 1.2 mm thick, 4.1% Mo, 25% Ni. HTS 7220.20.70.10 classification based on stainless nature, cold-reduction only, precise width/thickness, and qualifying Ni/Mo percentages.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If of a thickness of 0.25 mm or less
Thin-gauge (<0.25 mm) cold-rolled stainless classified as foil in preceding subheadings.
If plated or coated with other metal
Metal-coated stainless (beyond plain cold-rolling) moves to Chapter 72 coated products.
If of high-strength steel specs
If meeting high-strength yield point criteria in note (a), uses strength-based classification.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Confirm not razor blade steel per note (d)—wrong dimensions/composition
• Gauge thickness at multiple points for uniformity
• Use proper packing to prevent coil set
Related Products under HTS 7220.20.70.10
17-4 PH Stainless Steel Cold-Rolled Strip
Cold-rolled flat-rolled stainless steel strip of 17-4 PH alloy (UNS S17400), width 250 mm, thickness 0.8 mm, containing ~4% molybdenum and ~4% nickel. Classified under HTS 7220.20.70.10 due to stainless steel composition, cold-rolled state, width <300 mm, thickness 0.25-1.25 mm, and specific Ni/Mo content ranges.
Custom 15-5 PH Stainless Steel Sheet
Cold-reduced stainless steel sheet of 15-5 PH precipitation hardening grade, 280 mm wide, 1.0 mm thick, with 3.2% Mo and 4.2% Ni. Fits HTS 7220.20.70.10 as flat-rolled stainless, not further worked than cold-rolled, specific dimensions and alloying elements.
Nitronic 50 Stainless Steel Cold-Rolled Band
Nitronic 50 (XM-19) austenitic stainless steel cold-rolled band, 150 mm width, 0.6 mm thickness, featuring 2.0% molybdenum and 12% nickel. Meets HTS 7220.20.70.10 criteria for stainless steel, cold-rolled, narrow width, intermediate thickness, and specified alloy limits.
PH 13-8 Mo Stainless Steel Precision Strip
Precision cold-rolled strip of PH 13-8 Mo martensitic precipitation hardening stainless steel, 200 mm wide, 0.9 mm thick, 2.5% Mo, 8.5% Ni. Classified in HTS 7220.20.70.10 for stainless flat-rolled products meeting exact dimensional and compositional requirements.
Custom Molybdenum-Bearing 316L Stainless Strip
Modified 316L austenitic stainless steel cold-rolled strip with 3.8% molybdenum and 11% nickel, 240 mm width, 1.1 mm thickness. HTS 7220.20.70.10 applies to this not-further-worked stainless product within precise width, thickness, and alloy parameters.
A286 Stainless Steel Cold-Reduced Ribbon
A286 precipitation hardening stainless steel cold-reduced narrow ribbon, 180 mm wide, 0.4 mm thick, 1.8% Mo, 15% Ni. Perfectly matches HTS 7220.20.70.10 for cold-rolled stainless steel of specified narrow width, thickness range, and intermediate Mo/Ni levels.