AISI 410 Cold-Rolled Stainless Steel Strip
Cold-rolled flat strip of AISI 410 martensitic stainless steel, width 250 mm, thickness 1.5 mm, containing 11.5% chromium by weight. This product is not further worked beyond cold-rolling and falls under HTS 7220.20.60.60 due to its narrow width under 300 mm, thickness over 1.25 mm, and chromium content below 15%. Used in cutlery and valve components.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If chromium content 15% or higher
Stainless steel with 15%+ chromium shifts to the 7220.20.70 series per statistical suffixes.
If width 600 mm or more
Flat-rolled stainless steel cold-rolled products of 600 mm+ width fall under heading 7219, not 7220.
If polished or further surface worked
Chapter notes define 'further worked' surface treatments like polishing move product to Chapter 72 heading 7222.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificates confirming chromium content below 15% and exact dimensions to avoid reclassification
• Ensure product is free of further surface treatments like polishing or coating per chapter notes to qualify as 'not further worked'
• Declare precise width and thickness measurements; discrepancies can lead to duty adjustments or penalties
Related Products under HTS 7220.20.60.60
13% Chromium Cold-Reduced Steel Sheet
Cold-reduced stainless steel sheet, 280 mm width, 2.0 mm thick, with 13% chromium content, suitable for automotive trim. Classified under HTS 7220.20.60.60 as a narrow (<300 mm), thick (>1.25 mm) cold-rolled product not further worked, distinguished by low chromium martensitic composition.
Martensitic 420 Stainless Steel Coil Strip
Narrow coil strip of AISI 420 stainless steel, 1.8 mm thick, 290 mm wide, 12.8% chromium, cold-rolled for pump shafts. HTS 7220.20.60.60 applies to this not-further-worked product due to width <300 mm, thickness >1.25 mm, and sub-15% chromium meeting legal definitions.
Low Chromium 410S Cold-Rolled Ribbon
Cold-rolled ribbon of 410S stainless steel (11% Cr), 1.6 mm thick, 150 mm wide for razor blade stock precursors. Fits HTS 7220.20.60.60 as cold-rolled, narrow flat-rolled stainless with thickness exceeding 1.25 mm and chromium under 15%, not further worked.
Cold-Reduced 12% Cr Valve Steel Sheet
Cold-reduced sheet of 12% chromium valve steel, 220 mm width, 1.75 mm thickness for engine valve production. This stainless steel product is classified in HTS 7220.20.60.60 for its cold-rolled state, narrow width, specified thickness, and chromium below 15% threshold.