Cold-Rolled Martensitic Stainless Sheet 0.5mm x 350mm Low Cr
Thin cold-rolled martensitic stainless steel sheet, 0.5mm thickness by 350mm width, formulated with under 15% chromium for cost-sensitive applications like hardware components. Meets HTS 7220.20.10.60 criteria: cold-reduced only, 300mm+ width <600mm, and low chromium per chapter note (a). Used in cutlery blanks and fasteners.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If further worked with metal coating
Chapter 72 explicitly lists metal coating as 'further worked,' moving product out of base cold-rolled category.
If high-strength steel per note (a)
Products meeting high-strength steel yield point criteria (275 MPa min for <3mm) classified separately regardless of chromium.
If clad or certain alloy compositions
Cladding or specific alloying pushes into different flat-rolled headings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include heat analysis certificates specifying exact chromium percentage to support <15% declaration
• Avoid any surface treatments like phosphatizing which qualify as 'further worked' per chapter notes
• Verify importer's knowledge of statistical reporting requirements for precise width bands
Related Products under HTS 7220.20.10.60
Cold-Rolled 430 Stainless Steel Sheet 1.0mm x 500mm
Flat-rolled stainless steel sheet made from grade 430 alloy containing approximately 16-18% chromium but certified under customs documentation as less than 15% effective chromium content for tariff purposes, cold-rolled to 1.0mm thickness and 500mm width. This product falls under HTS 7220.20.10.60 as it is not further worked beyond cold-rolling, has a width of 300mm or more but less than 600mm, and meets the low-chromium specification. Commonly used in automotive trim and appliance exteriors.
Cold-Reduced 409 Stainless Steel Strip 0.8mm x 450mm
Cold-reduced flat-rolled product of grade 409 stainless steel with less than 15% chromium by weight, 0.8mm thick and 450mm wide, suitable for exhaust system components. Classified under HTS 7220.20.10.60 due to cold-rolling process only, width between 300-600mm, and low chromium composition as per U.S. note definitions. Ideal for ferritic stainless applications requiring good formability.
Ferritic 434 Stainless Steel Cold-Rolled Plate 1.2mm x 550mm
Cold-rolled ferritic grade 434 stainless steel plate with controlled chromium below 15%, 1.2mm thick and 550mm wide for architectural paneling. HTS 7220.20.10.60 applies as not further worked, width 300-600mm range, low Cr content fitting U.S. note exclusions. Offers improved corrosion resistance over carbon steel.
Low Chromium 410S Stainless Cold-Reduced Sheet 0.9mm x 420mm
Grade 410S stainless steel sheet, cold-reduced to 0.9mm x 420mm, with chromium content maintained below 15% for weldability in fabrication. Classifies to HTS 7220.20.10.60: flat-rolled stainless, cold-rolled not further worked, 300mm+ width, low Cr per tariff specs. Used in pressure vessel linings.