Other
Flat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of 300 mm or more > Containing more than 0.5 percent but less than 24 percent by weight of nickel: > Other
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Products classified under HTS 7220.20.10.15
300 Series Cold-Rolled Stainless Steel Strip 430mm Wide
Cold-rolled flat-rolled stainless steel strip of 430 mm width, containing approximately 8-10% nickel and 18% chromium, not further worked beyond cold-reduction. It falls under HTS 7220.20.10.15 as a stainless steel product less than 600 mm wide, 300 mm or more in width, with nickel content between 0.5% and 24%. Commonly used in manufacturing kitchen utensils and decorative trim.
Stainless Steel Cold-Reduced Sheet 500mm Wide for Appliances
Cold-reduced stainless steel sheet measuring 500 mm in width, with 10% nickel content, used in appliance manufacturing. Classified under HTS 7220.20.10.15 due to stainless steel composition, width of 300 mm or more but under 600 mm, and lack of further working beyond cold-rolling. Ideal for refrigerator panels and oven liners.
Nickel-Alloy Stainless Steel Coil Stock 350mm Wide
Cold-rolled coil stock of stainless steel, 350 mm wide, with 12% nickel by weight, supplied in master coils for slitting. Meets HTS 7220.20.10.15 criteria: flat-rolled stainless, <600 mm wide, >=300 mm wide, 0.5-24% Ni, not further worked. Used for automotive trim and hardware components.
AISI 304 Cold-Rolled Stainless Steel Banding 450mm Wide
AISI 304 grade cold-rolled stainless steel flat banding, 450 mm width, 8-10.5% nickel content, for industrial packaging strapping. HTS 7220.20.10.15 applies as cold-rolled stainless steel, width 300-600 mm, appropriate nickel range, no further surface treatments. Provides corrosion resistance for securing heavy loads.
Cold-Rolled 316L Stainless Steel Sheet 380mm Wide
Low-carbon 316L stainless steel cold-rolled sheet, 380 mm wide, with 10-14% nickel and molybdenum addition for pitting resistance. Fits HTS 7220.20.10.15: stainless flat-rolled, cold-reduced, 300+ mm <600 mm width, 0.5-24% Ni, not further worked. Suited for chemical processing equipment panels.
Duplex Stainless Steel Cold Band 550mm Wide
Cold-rolled duplex stainless steel band, 550 mm width, with 4-8% nickel balancing austenitic/ferritic structure for high strength. Under HTS 7220.20.10.15 for cold-rolled stainless flat products 300-600 mm wide, >0.5% <24% Ni, no further working. Used in oil & gas structural components.
Cold-Reduced Stainless Steel for Cookware Blanks 420mm Wide
Cold-reduced stainless steel blanks sized 420 mm wide, 12% nickel, supplied for deep drawing into pots and pans. HTS 7220.20.10.15 covers this not-further-worked cold-rolled stainless strip/sheet in the specified width and nickel range. Provides food-grade corrosion resistance.
Nitronic 50 Cold-Rolled Stainless Strip 480mm Wide
Nitronic 50 high-strength austenitic stainless cold-rolled strip, 480 mm wide, ~12% nickel with silicon enhancement. Classifies in HTS 7220.20.10.15 as cold-rolled stainless flat-rolled <600 mm >=300 mm wide, 0.5-24% Ni, not further worked. For wear-resistant valve components.