Nitronic 60 Stainless Steel Sheet
Nitronic 60 (high Mn austenitic) stainless sheet, flat-rolled 700 mm width, annealed. HTS 7219.90.00 covers this galling-resistant stainless not fitting prior subheadings. For valves and pump components.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If made into valves
Finished valves classify functionally under taps/valves heading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• High manganese content certification differentiates from standard austenitics
• No specific note match; remains general stainless
Related Products under HTS 7219.90.00
316Ti Stabilized Stainless Plate
316Ti titanium-stabilized stainless plate for welding applications, 4 mm thick, 1000 mm width. HTS 7219.90.00 as other wide stainless flat-rolled. Prevents sensitization in welded structures.
Custom 465 Stainless Steel Aerospace Sheet
Custom 465 (aged-hardening martensitic) stainless sheet for aerospace, 0.8 mm thick, 620 mm width. HTS 7219.90.00 other stainless flat-rolled >600 mm. High strength after aging treatment.
430F Stainless Steel Free-Machining Sheet
430F free-machining ferritic stainless sheet with sulfur addition, width 900 mm. HTS 7219.90.00 other stainless flat-rolled >600 mm. Enhanced machinability for screw production.
430 Stainless Steel Sheet 2B Finish
Flat-rolled stainless steel sheet made from grade 430, with a 2B cold-rolled finish, width exceeding 600 mm, and thickness typically between 0.4-3 mm. Classified under HTS 7219.90.00 as 'other' flat-rolled stainless steel products not specifically covered by prior subheadings like hot-rolled, cold-rolled not annealed, or clad. The smooth, reflective surface is achieved through standard cold-rolling and annealing processes.
304 Stainless Steel Polished Plate
Grade 304 stainless steel flat-rolled plate with a polished No.4 finish, width over 600 mm, and thickness 3-6 mm. Falls under HTS 7219.90.00 as 'other' stainless steel products wider than 600 mm, distinguished from hot-rolled (cladding excluded) or specific cold-rolled categories by its polished surface treatment. Used in architectural panels and food processing equipment.
316L Stainless Steel Annealed Sheet
Low-carbon 316L stainless steel sheet, fully annealed and pickled, width 1200 mm, thickness 1.5 mm. HTS 7219.90.00 covers this as 'other' flat-rolled stainless steel not matching coil/not annealed cold-rolled or hot-rolled exclusions. The annealing process softens the material for marine and chemical applications.