MartenSite XM-24 Stainless Coil
Martensitic stainless coil with 2.8% Mo and 0.8% Ni, width exceeding 600 mm. HTS 7219.90.00.20 based on flat-rolled stainless alloy parameters. For turbine components.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If tool steel composition
Matches Chapter note (e) tool steel element combos shift classification.
If hollow drill bars
Specific end-use forms like drill bars have dedicated headings.
If formed into fittings
Pipe/tube fittings from this steel become Chapter 73 articles.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Specify martensitic grade in entry summary for proper duty
• No reduction for pre-entry rust per Chapter note
• Coordinate with steel import licenses if applicable
Related Products under HTS 7219.90.00.20
17-4 PH Stainless Steel Sheet
Precipitation-hardening stainless steel sheet with approximately 4% molybdenum and over 0.5% nickel, width exceeding 600 mm. Classified under HTS 7219.90.00.20 due to its specific alloy composition meeting the molybdenum (1.5-5%) and nickel (>0.5%) criteria for flat-rolled stainless steel products. Used in aerospace and medical applications for high strength and corrosion resistance.
AL-6XN Stainless Steel Plate
Super-austenitic stainless steel plate with 3-4% molybdenum and about 1.5% nickel, in widths over 600 mm. Falls under HTS 7219.90.00.20 for flat-rolled stainless products with 1.5-5% Mo and >0.5% Ni. Ideal for severe corrosive environments like chemical processing.
904L Stainless Steel Coil
Austenitic stainless steel coil featuring 4-5% molybdenum and around 1.5% nickel, width 600 mm or more. HTS 7219.90.00.20 applies to its flat-rolled form and precise alloy specs of >1.5% but <5% Mo with >0.5% Ni. Commonly used in pharmaceutical and marine equipment.
317LMN Stainless Steel Sheet
Low-carbon molybdenum-enhanced stainless sheet with 2.5-3% Mo and 1% Ni, over 600 mm wide. Meets HTS 7219.90.00.20 criteria for flat-rolled stainless with specified Mo and Ni levels. Suited for pulp/paper industry due to pitting resistance.
XM-29 Stainless Steel Plate
High-molybdenum austenitic stainless plate (approx 3% Mo, 1.2% Ni) in widths >=600 mm. Classified HTS 7219.90.00.20 for its flat-rolled stainless nature and exact Mo (1.5-5%)/Ni (>0.5%) profile. Used in pollution control and desalination.
316L Mod Stainless Steel Coil
Modified 316L stainless coil with elevated 2.5% molybdenum and 1.1% nickel, 600+ mm width. HTS 7219.90.00.20 due to flat-rolled stainless with 1.5-5% Mo and >0.5% Ni composition. Applied in offshore oil platforms.