17-4 PH Stainless Steel Sheet
Precipitation-hardening stainless steel sheet with approximately 4% molybdenum and over 0.5% nickel, width exceeding 600 mm. Classified under HTS 7219.90.00.20 due to its specific alloy composition meeting the molybdenum (1.5-5%) and nickel (>0.5%) criteria for flat-rolled stainless steel products. Used in aerospace and medical applications for high strength and corrosion resistance.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If width under 600 mm
Flat-rolled stainless steel products narrower than 600 mm shift to Chapter 72 heading 7220 for other widths.
If under 0.5% nickel content
Lower nickel levels classify under different subheading within 7219 for non-Ni-bearing stainless variants.
If molybdenum under 1.5%
Mo content below 1.5% but >0.5% Ni moves to the prior molybdenum sub-range in the same heading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificates verifying exact molybdenum (1.5-5%) and nickel (>0.5%) content to avoid reclassification
• Ensure width measurement exceeds 600 mm with precise documentation
• Watch for anti-dumping duties on certain stainless steel origins
Related Products under HTS 7219.90.00.20
AL-6XN Stainless Steel Plate
Super-austenitic stainless steel plate with 3-4% molybdenum and about 1.5% nickel, in widths over 600 mm. Falls under HTS 7219.90.00.20 for flat-rolled stainless products with 1.5-5% Mo and >0.5% Ni. Ideal for severe corrosive environments like chemical processing.
904L Stainless Steel Coil
Austenitic stainless steel coil featuring 4-5% molybdenum and around 1.5% nickel, width 600 mm or more. HTS 7219.90.00.20 applies to its flat-rolled form and precise alloy specs of >1.5% but <5% Mo with >0.5% Ni. Commonly used in pharmaceutical and marine equipment.
317LMN Stainless Steel Sheet
Low-carbon molybdenum-enhanced stainless sheet with 2.5-3% Mo and 1% Ni, over 600 mm wide. Meets HTS 7219.90.00.20 criteria for flat-rolled stainless with specified Mo and Ni levels. Suited for pulp/paper industry due to pitting resistance.
XM-29 Stainless Steel Plate
High-molybdenum austenitic stainless plate (approx 3% Mo, 1.2% Ni) in widths >=600 mm. Classified HTS 7219.90.00.20 for its flat-rolled stainless nature and exact Mo (1.5-5%)/Ni (>0.5%) profile. Used in pollution control and desalination.
316L Mod Stainless Steel Coil
Modified 316L stainless coil with elevated 2.5% molybdenum and 1.1% nickel, 600+ mm width. HTS 7219.90.00.20 due to flat-rolled stainless with 1.5-5% Mo and >0.5% Ni composition. Applied in offshore oil platforms.
Nitronic 60 Stainless Steel Sheet
High-strength austenitic sheet with 4% molybdenum and 1% nickel, width over 600 mm. Fits HTS 7219.90.00.20 for flat-rolled stainless alloy specs. Excellent galling resistance for valves/fittings.