304L Low Carbon Stainless Cold-Reduced Sheet 0.35mm
Low-carbon 304L stainless steel sheet, cold-reduced to 0.35 mm thick with width ≥600 mm, not subjected to further working. Fits HTS 7219.35.00 for thin-gauge stainless flat products used in food processing equipment.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If phosphated or oxalated
Chemical surface treatments specified in chapter notes as 'further worked'.
If width less than 600 mm
Stainless steel strips narrower than 600 mm classify under 7220.
If formed into square tubes
Tubular products derived from sheet move to Chapter 73 tubes/pipes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Use calibrated gauges for thickness verification; discrepancies lead to penalties
• Confirm 'not further worked' status excludes even light oil coatings per US note definitions
• Segregate by grade in containers to prevent cross-contamination classification issues
Related Products under HTS 7219.35.00
304 Stainless Steel Cold-Rolled Sheet 0.4mm Thick
Flat-rolled 304 stainless steel sheet, cold-rolled to a thickness of 0.4 mm and width exceeding 600 mm, not further worked beyond cold-reduction. This product falls under HTS 7219.35.00 due to its stainless steel composition, precise thickness under 0.5 mm, and lack of additional surface treatments like polishing or coating.
316L Stainless Steel Cold-Reduced Coil 0.3mm
Cold-reduced 316L stainless steel coil, 0.3 mm thick with width over 600 mm, in flat-rolled form without additional processing. Classified under HTS 7219.35.00 for its thin gauge stainless steel that's only cold-rolled, ideal for corrosion-resistant applications.
430 Stainless Steel Cold-Rolled Sheet 0.45mm
Ferritic 430 grade stainless steel flat-rolled sheet, cold-rolled to 0.45 mm thickness and minimum 600 mm width, not further worked. HTS 7219.35.00 applies to this thin, cold-reduced stainless product used in appliances and automotive trim.
201 Stainless Steel Thin Cold-Rolled Plate 0.2mm
Austenitic 201 stainless steel cold-rolled plate at 0.2 mm thickness, width 600 mm or more, without further surface treatments. This ultra-thin product matches HTS 7219.35.00 criteria for cold-reduced stainless flat-rolled goods.
409 Stainless Steel Cold-Rolled Automotive Sheet 0.48mm
409 ferritic stainless steel cold-rolled sheet at 0.48 mm thickness for automotive exhaust, width over 600 mm uncoated. HTS 7219.35.00 covers this cold-reduced stainless product not further processed.
310 Stainless Steel Heat-Resistant Cold Sheet 0.4mm
High-temperature 310 stainless steel cold-rolled sheet, 0.4 mm thick and 600+ mm wide, without further treatments. Matches HTS 7219.35.00 for thin cold-reduced stainless flat-rolled products.