17-4 PH Stainless Steel Cold-Rolled Sheet 0.3mm
Precipitation-hardening 17-4 PH stainless cold-rolled sheet 0.3 mm thick, 900 mm wide cut sheets. HTS 7219.35.0050 applies: stainless flat-rolled cold-reduced ≥600 mm, <0.5 mm thick, not further worked.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If meets razor blade steel definition per note (d)
Ultra-specific stainless compositions for razors have dedicated classification.
If hot-rolled product of same thickness
Hot-rolled processing uses parallel heading 7219 structure.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• PH grades may meet high-strength steel note; still classify as stainless first
• Condition (annealed/solution treated) doesn't affect basic cold-rolled status
• Military/aerospace end-use may trigger additional regulations beyond HTS
Related Products under HTS 7219.35.00.50
304 Stainless Steel Cold-Reduced Plate 0.45mm
Cold-reduced 304 stainless steel plate, 0.45 mm thick, 1500 mm width, rectangular cut sheets not coiled. Fits HTS 7219.35.0050 due to stainless steel composition, cold-rolling without further working, thickness <0.5 mm, and width ≥600 mm.
430 Stainless Steel Cold-Rolled Sheet 0.4mm Thick
Flat-rolled 430 stainless steel sheet, cold-rolled to 0.4 mm thickness, 1200 mm wide, supplied in cut-to-length sheets not in coils. Classifies under HTS 7219.35.0050 as stainless steel, width over 600 mm, thickness under 0.5 mm, cold-rolled but not further worked.
316L Stainless Steel Shim Stock Sheet 0.3mm
0.3 mm thick 316L stainless steel cold-rolled shim stock sheets, 1000 mm wide, flat not in coils. HTS 7219.35.0050 applies as cold-rolled stainless flat product ≥600 mm wide, <0.5 mm thick, without further surface treatments.
409 Stainless Steel Cold-Rolled Panel 0.48mm
Ferritic 409 grade stainless cold-rolled panels 0.48 mm thick, 1250 mm wide sheets. Qualifies for 7219.35.0050: stainless flat-rolled ≥600 mm wide, cold-rolled <0.5 mm thick, not further worked or coiled.
201 Stainless Steel Cold-Reduced Blank 0.35mm
Austenitic 201 stainless steel cold-reduced circular blanks, 0.35 mm thick, 800 mm diameter equivalent sheets. HTS 7219.35.0050 for cold-rolled stainless ≥600 mm wide, <0.5 mm, not coiled or further worked.
310 Stainless Steel Thin Cold-Rolled Sheet 0.2mm
High-temperature 310 stainless cold-rolled sheet 0.2 mm thick, 610 mm wide cut lengths. Classifies 7219.35.0050 as stainless flat-rolled product cold-rolled only, width just over 600 mm, under 0.5 mm thick, not in coils.