201 Stainless Steel Cold-Reduced Blank 0.35mm
Austenitic 201 stainless steel cold-reduced circular blanks, 0.35 mm thick, 800 mm diameter equivalent sheets. HTS 7219.35.0050 for cold-rolled stainless ≥600 mm wide, <0.5 mm, not coiled or further worked.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If hot-rolled stainless of same thickness
Processing method (hot vs cold-rolled) determines primary heading 7212 vs 7219.
If grain-oriented electrical steel
Special electrical alloy steels classify under 7225 regardless of stainless status.
If made into finished kitchenware articles
Fabricated end products shift from Chapter 72 semi-finished to Chapter 73 articles.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Blanks may be considered 'further worked' if punched; ensure simple sheared edges only
• 201 grade cheaper but verify chromium content meets stainless definition
• Package securely; no duty allowance for import rust per Chapter rules
Related Products under HTS 7219.35.00.50
304 Stainless Steel Cold-Reduced Plate 0.45mm
Cold-reduced 304 stainless steel plate, 0.45 mm thick, 1500 mm width, rectangular cut sheets not coiled. Fits HTS 7219.35.0050 due to stainless steel composition, cold-rolling without further working, thickness <0.5 mm, and width ≥600 mm.
430 Stainless Steel Cold-Rolled Sheet 0.4mm Thick
Flat-rolled 430 stainless steel sheet, cold-rolled to 0.4 mm thickness, 1200 mm wide, supplied in cut-to-length sheets not in coils. Classifies under HTS 7219.35.0050 as stainless steel, width over 600 mm, thickness under 0.5 mm, cold-rolled but not further worked.
316L Stainless Steel Shim Stock Sheet 0.3mm
0.3 mm thick 316L stainless steel cold-rolled shim stock sheets, 1000 mm wide, flat not in coils. HTS 7219.35.0050 applies as cold-rolled stainless flat product ≥600 mm wide, <0.5 mm thick, without further surface treatments.
409 Stainless Steel Cold-Rolled Panel 0.48mm
Ferritic 409 grade stainless cold-rolled panels 0.48 mm thick, 1250 mm wide sheets. Qualifies for 7219.35.0050: stainless flat-rolled ≥600 mm wide, cold-rolled <0.5 mm thick, not further worked or coiled.
310 Stainless Steel Thin Cold-Rolled Sheet 0.2mm
High-temperature 310 stainless cold-rolled sheet 0.2 mm thick, 610 mm wide cut lengths. Classifies 7219.35.0050 as stainless flat-rolled product cold-rolled only, width just over 600 mm, under 0.5 mm thick, not in coils.
430F Stainless Steel Precision Cold-Rolled Strip 0.4mm
Free-machining 430F stainless precision cold-rolled strip stock 0.4 mm x 1000 mm wide sheets. HTS 7219.35.0050: cold-rolled stainless flat product ≥600 mm, thickness <0.5 mm, no further working, cut-to-length.