Type 316L Stainless Steel Cold-Rolled Coil
Cold-rolled stainless steel coil of 0.4 mm thickness and 1250 mm width, containing 10-14% nickel and 2-3% molybdenum for enhanced corrosion resistance. Classified under HTS 7219.35.00.05 due to its stainless steel composition, cold-rolled finish not further worked, coil form, thickness under 0.5 mm, and specific Ni and Mo content per chapter notes. Used in chemical processing equipment and marine applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If containing 1.5% or less molybdenum
Lower molybdenum content shifts to preceding thickness/thickness subheading within same cold-rolled stainless coil structure.
If further worked with surface treatment like polishing
Chapter 72 defines 'further worked' to include polishing or coating, moving to Chapter 72 heading 7220 for worked stainless products.
If nickel content ≤0.5%
Exceeds Ni threshold of >0.5%, so classified here; low-Ni stainless falls under earlier nickel subheading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificates verifying Ni (0.5-24%) and Mo (1.5-5%) content to avoid reclassification
• Declare exact thickness (<0.5 mm) and width (≥600 mm) with precise measurements to match subheading
• Avoid claims for rust/discoloration allowances per Chapter 72 note; inspect coils upon arrival
Related Products under HTS 7219.35.00.05
317 Stainless Steel Cold-Reduced Coil
Flat-rolled 317 grade stainless steel coil, 0.35 mm thick, 1500 mm wide, with 11-15% Ni and 3-4% Mo for superior pitting resistance. Fits HTS 7219.35.00.05 as cold-rolled stainless not further worked, in coils under 0.5 mm thick with specified alloying elements. Ideal for pharmaceutical and pulp/paper industry components.
Type 316Ti Stabilized Stainless Coil
Cold-rolled Type 316Ti stainless steel coil, 0.45 mm thickness, 1000 mm width, featuring 10-14% Ni, 2.5% Mo and titanium stabilization. Meets HTS 7219.35.00.05 criteria for stainless flat-rolled products cold-reduced in coils under 0.5 mm with requisite Ni/Mo per US notes. Applied in heat exchangers and welding applications.
AL-6XN Alloy Cold-Rolled Stainless Coil
High-performance AL-6XN super-austenitic stainless coil, cold-rolled to 0.3 mm x 1200 mm, with 20-22% Ni and 4% Mo for extreme corrosion environments. Precisely matches HTS 7219.35.00.05 for thin cold-rolled stainless coils with specified high Ni/Mo content, not further worked. Used in seawater desalination plants.
Custom 317LMN Cold-Reduced Coil
317LMN low-carbon, high-Mo stainless steel cold-rolled coil, 0.48 mm thick, 1400 mm wide, 13% Ni, 4.5% Mo for weldability in sour service. Classifies to HTS 7219.35.00.05 based on stainless composition, cold-reduction, coil form, thin gauge, and alloy specs matching US chapter notes. Suited for oil/gas pressure vessels.
Type 316H High-Carbon Stainless Coil
Elevated carbon Type 316H stainless cold-rolled coil for high-temperature service, 0.4 mm x 900 mm, 12% Ni, 2.8% Mo content. HTS 7219.35.00.05 applies to its cold-rolled stainless flat product form, coil packaging, thin section, and precise alloying per definitions. Used in power generation furnaces.
SMO 254 Cold-Rolled Stainless Steel Coil
Uranus SMO 254 super-austenitic grade cold-rolled coil, 0.25 mm thickness, 1600 mm width, 18% Ni, 4.8% Mo for urea plants. Perfectly aligns with HTS 7219.35.00.05 specs for thin cold-reduced stainless coils with high specified Ni/Mo, not further worked. Critical for fertilizer production equipment.