SMO 254 Cold-Rolled Stainless Steel Coil
Uranus SMO 254 super-austenitic grade cold-rolled coil, 0.25 mm thickness, 1600 mm width, 18% Ni, 4.8% Mo for urea plants. Perfectly aligns with HTS 7219.35.00.05 specs for thin cold-reduced stainless coils with high specified Ni/Mo, not further worked. Critical for fertilizer production equipment.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If hot-rolled condition
Base processing (hot vs cold-rolled) separates 7212 hot-rolled from 7219 cold-rolled headings.
If electrical (not general stainless)
Electrical steel properties shift thin flat-rolled stainless to specialized 7220 electrical provisions.
If pre-formed into valve components
Machined or formed parts classify under Chapter 84/85 taps/valves vs flat Chapter 72 sheet.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Chemical certification mandatory; high Mo near 5% limit requires precise analysis
• Confirm width ≥600 mm and coil form at entry to secure correct heading
• Check for Section 232 tariffs on steel; may apply regardless of HTS specificity
Related Products under HTS 7219.35.00.05
Type 316L Stainless Steel Cold-Rolled Coil
Cold-rolled stainless steel coil of 0.4 mm thickness and 1250 mm width, containing 10-14% nickel and 2-3% molybdenum for enhanced corrosion resistance. Classified under HTS 7219.35.00.05 due to its stainless steel composition, cold-rolled finish not further worked, coil form, thickness under 0.5 mm, and specific Ni and Mo content per chapter notes. Used in chemical processing equipment and marine applications.
317 Stainless Steel Cold-Reduced Coil
Flat-rolled 317 grade stainless steel coil, 0.35 mm thick, 1500 mm wide, with 11-15% Ni and 3-4% Mo for superior pitting resistance. Fits HTS 7219.35.00.05 as cold-rolled stainless not further worked, in coils under 0.5 mm thick with specified alloying elements. Ideal for pharmaceutical and pulp/paper industry components.
Type 316Ti Stabilized Stainless Coil
Cold-rolled Type 316Ti stainless steel coil, 0.45 mm thickness, 1000 mm width, featuring 10-14% Ni, 2.5% Mo and titanium stabilization. Meets HTS 7219.35.00.05 criteria for stainless flat-rolled products cold-reduced in coils under 0.5 mm with requisite Ni/Mo per US notes. Applied in heat exchangers and welding applications.
AL-6XN Alloy Cold-Rolled Stainless Coil
High-performance AL-6XN super-austenitic stainless coil, cold-rolled to 0.3 mm x 1200 mm, with 20-22% Ni and 4% Mo for extreme corrosion environments. Precisely matches HTS 7219.35.00.05 for thin cold-rolled stainless coils with specified high Ni/Mo content, not further worked. Used in seawater desalination plants.
Custom 317LMN Cold-Reduced Coil
317LMN low-carbon, high-Mo stainless steel cold-rolled coil, 0.48 mm thick, 1400 mm wide, 13% Ni, 4.5% Mo for weldability in sour service. Classifies to HTS 7219.35.00.05 based on stainless composition, cold-reduction, coil form, thin gauge, and alloy specs matching US chapter notes. Suited for oil/gas pressure vessels.
Type 316H High-Carbon Stainless Coil
Elevated carbon Type 316H stainless cold-rolled coil for high-temperature service, 0.4 mm x 900 mm, 12% Ni, 2.8% Mo content. HTS 7219.35.00.05 applies to its cold-rolled stainless flat product form, coil packaging, thin section, and precise alloying per definitions. Used in power generation furnaces.