409 Cold-Rolled Stainless Steel Automotive Sheet 2.2mm
409 ferritic stainless steel sheet cold-rolled for automotive exhaust applications, 2.2 mm thick, 1000 mm wide, not coiled. Fits HTS 7219.33.0080 as not further worked cold-rolled stainless steel in the 1-3 mm thickness range.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness of 1 mm or less
Thinner cold-rolled stainless (<1mm) separates to 7219.31 subheading within same 'not in coils' category.
If high-strength steel per note (a)
Products meeting minimum yield point specs (275 MPa <3mm) classify as high-strength steel under 7208, not general stainless.
If narrow width (<600 mm) and electrolytically refined
Narrower electrolytically refined stainless shifts to 7220.10 from wide flat-rolled 7219.33.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Label for automotive end-use but classify by material/form, not application—avoid industrial vs retail end-use confusion
• Ensure no embossing/ribs that could qualify as concrete reinforcing patterns under note (c)
• Batch certificates must trace back to stainless melt to prevent alloy disputes
Related Products under HTS 7219.33.00.80
AISI 304 Cold-Rolled Stainless Steel Sheet 2mm Thick
Flat-rolled stainless steel sheet made from AISI 304 alloy, cold-rolled to a thickness of 2 mm and width over 600 mm, not in coils and not further worked beyond cold-reduction. This product falls under HTS 7219.33.0080 as it matches the exact criteria of cold-rolled stainless steel exceeding 1 mm but under 3 mm thick, supplied flat without additional surface treatments.
430 Grade Cold-Reduced Stainless Steel Plate 1.5mm
Ferritic 430 stainless steel plate, cold-reduced to 1.5 mm thickness, 1200 mm wide, supplied in cut-to-length sheets not in coils. Classifies under HTS 7219.33.0080 as cold-rolled stainless steel of specified thickness range, width ≥600 mm, without further working per chapter definitions.
316L Stainless Steel Cold-Rolled Sheet 1.8mm Thick
Low-carbon 316L austenitic stainless steel sheet, cold-rolled to 1.8 mm thickness, 1500 mm width, cut sheets not in coils. Meets HTS 7219.33.0080 for cold-rolled stainless flat products >1mm <3mm thick, ≥600mm wide, not further worked.
321 Stabilized Stainless Cold-Rolled Sheet 1.2mm
Titanium-stabilized 321 austenitic stainless steel, cold-rolled to 1.2 mm, 800 mm wide sheets not in coils. HTS 7219.33.0080 applies to this not further worked cold-reduced stainless product of intermediate thickness.
17-4PH Precipitation Hardening Stainless Sheet 2.5mm
17-4PH martensitic precipitation hardening stainless steel cold-rolled sheet, 2.5 mm thick, 900 mm wide, flat not coiled. Classifies in HTS 7219.33.0080 as cold-rolled stainless not further worked within thickness specs.
310 Cold-Rolled High-Temperature Stainless Sheet 1.6mm
310 austenitic stainless steel sheet for high-temperature service, cold-rolled 1.6 mm thick, 1100 mm wide, cut-to-length. HTS 7219.33.0080 for not further worked cold-rolled stainless flat-rolled product.