310 Cold-Rolled High-Temperature Stainless Sheet 1.6mm
310 austenitic stainless steel sheet for high-temperature service, cold-rolled 1.6 mm thick, 1100 mm wide, cut-to-length. HTS 7219.33.0080 for not further worked cold-rolled stainless flat-rolled product.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If chipper knife steel per note (f)
Very specific alloy composition for chipper knives has dedicated subheading vs general stainless.
If ball-bearing steel per note (h)
Precision alloy for bearings with exact C/Mn/Si/Cr limits classifies under 7225, not general stainless.
If formed into tanks/reservoirs
Fabrication into containers moves from Chapter 72 flat products to Chapter 73 tank classifications.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• High nickel/chromium content requires full alloy analysis to confirm stainless status
• No patterns/relief allowed—universal mill plate note (b) exclusion applies
• End-use statements helpful but material form dictates HTS classification
Related Products under HTS 7219.33.00.80
AISI 304 Cold-Rolled Stainless Steel Sheet 2mm Thick
Flat-rolled stainless steel sheet made from AISI 304 alloy, cold-rolled to a thickness of 2 mm and width over 600 mm, not in coils and not further worked beyond cold-reduction. This product falls under HTS 7219.33.0080 as it matches the exact criteria of cold-rolled stainless steel exceeding 1 mm but under 3 mm thick, supplied flat without additional surface treatments.
430 Grade Cold-Reduced Stainless Steel Plate 1.5mm
Ferritic 430 stainless steel plate, cold-reduced to 1.5 mm thickness, 1200 mm wide, supplied in cut-to-length sheets not in coils. Classifies under HTS 7219.33.0080 as cold-rolled stainless steel of specified thickness range, width ≥600 mm, without further working per chapter definitions.
316L Stainless Steel Cold-Rolled Sheet 1.8mm Thick
Low-carbon 316L austenitic stainless steel sheet, cold-rolled to 1.8 mm thickness, 1500 mm width, cut sheets not in coils. Meets HTS 7219.33.0080 for cold-rolled stainless flat products >1mm <3mm thick, ≥600mm wide, not further worked.
409 Cold-Rolled Stainless Steel Automotive Sheet 2.2mm
409 ferritic stainless steel sheet cold-rolled for automotive exhaust applications, 2.2 mm thick, 1000 mm wide, not coiled. Fits HTS 7219.33.0080 as not further worked cold-rolled stainless steel in the 1-3 mm thickness range.
321 Stabilized Stainless Cold-Rolled Sheet 1.2mm
Titanium-stabilized 321 austenitic stainless steel, cold-rolled to 1.2 mm, 800 mm wide sheets not in coils. HTS 7219.33.0080 applies to this not further worked cold-reduced stainless product of intermediate thickness.
17-4PH Precipitation Hardening Stainless Sheet 2.5mm
17-4PH martensitic precipitation hardening stainless steel cold-rolled sheet, 2.5 mm thick, 900 mm wide, flat not coiled. Classifies in HTS 7219.33.0080 as cold-rolled stainless not further worked within thickness specs.