AISI 201 Cold-Rolled Stainless Steel Coil 1.8mm
Austenitic AISI 201 stainless steel coil, cold-rolled to 1.8 mm thick, 1800 mm wide, suited for consumer goods manufacturing. HTS 7219.33.0044 applies to this general cold-rolled stainless coil not meeting specialty notes, width over 600 mm, 1-3 mm thick. Cost-effective alternative to 304 with good ductility.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If of thickness of 0.5 mm or more but not over 1 mm
Slightly thinner gauges fall into the prior cold-rolled thickness subheading.
If razor blade steel per note (d)
Specific thin stainless for razor blades (≤0.25mm, ≤23mm wide, Cr≤14.7%) goes to heading 7220.
If not stainless (e.g., carbon steel)
Non-stainless flat-rolled products shift to Chapter 72 heading 7212.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Submit MTC showing nitrogen/manganese levels distinguishing 201 from 304 grades
• Ensure no additional processing like slitting counts as further working; declare as imported
• Avoid partial damage claims for discoloration as Chapter 72 prohibits duty reductions
Related Products under HTS 7219.33.00.44
17-4 PH Precipitation Hardening Stainless Coil 2.0mm
Precipitation hardening 17-4 PH stainless steel coil, cold-rolled 2 mm thick, 1300 mm wide. HTS 7219.33.0044 for this martensitic cold-rolled stainless not matching specialty notes. High strength for aerospace components.
Duplex 2205 Cold-Rolled Stainless Steel Coil 1.4mm
Duplex 2205 stainless coil with high strength/corrosion resistance, cold-rolled 1.4 mm, 1700 mm wide. Under HTS 7219.33.0044 as other cold-rolled stainless coil specs. For oil/gas piping.
AISI 301 Cold-Rolled Stainless Steel Coil 2.8mm
High strength AISI 301 stainless coil, cold-rolled to 2.8 mm thick, 900 mm wide. HTS 7219.33.0044 for general cold-rolled stainless dimensions. Spring temper for automotive.
439 Cold-Rolled Stainless Steel Coil 1.9mm Thick
Ferritic 439 stainless coil for exhaust, cold-rolled 1.9 mm, 1550 mm wide. Fits HTS 7219.33.0044 specs perfectly.
AISI 304L Low Carbon Stainless Coil 2.4mm
Low carbon 304L stainless coil, cold-rolled 2.4 mm, 2000 mm wide. HTS 7219.33.0044 classification.
316Ti Stabilized Stainless Coil 1.3mm
316Ti stainless coil cold-rolled 1.3 mm for weldability. HTS 7219.33.0044.