430 Grade Cold-Rolled Stainless Steel Coil 2.2mm Thick
Ferritic 430 stainless steel coil cold-rolled to 2.2 mm thickness, 1000 mm wide, in coil form for automotive trim applications. Fits HTS 7219.33.0044 as non-specialty, cold-rolled flat stainless product, width ≥600 mm, thickness 1-3 mm, not further worked. Offers good formability and corrosion resistance for decorative uses.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If universal mill plate dimensions
If width 150-1250 mm and thickness ≥4 mm (not coiled), matches note (b) universal mill plate definition.
If thickness under 1 mm
Thinner cold-rolled stainless coils enter earlier thickness band in the cold-rolled subheading.
If clad or coated
Cladding or metal/nonmetal coating constitutes 'further worked' per Chapter 72 notes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify chromium content (16-18%) via chemical analysis certificate to confirm ferritic stainless classification
• Include gauge tolerance specs in entry docs; thickness must be certified between 1-3 mm to prevent shift to adjacent codes
• Label coils clearly with grade and dimensions; common pitfall is incorrect width declaration leading to 7220 reclass
Related Products under HTS 7219.33.00.44
17-4 PH Precipitation Hardening Stainless Coil 2.0mm
Precipitation hardening 17-4 PH stainless steel coil, cold-rolled 2 mm thick, 1300 mm wide. HTS 7219.33.0044 for this martensitic cold-rolled stainless not matching specialty notes. High strength for aerospace components.
Duplex 2205 Cold-Rolled Stainless Steel Coil 1.4mm
Duplex 2205 stainless coil with high strength/corrosion resistance, cold-rolled 1.4 mm, 1700 mm wide. Under HTS 7219.33.0044 as other cold-rolled stainless coil specs. For oil/gas piping.
AISI 301 Cold-Rolled Stainless Steel Coil 2.8mm
High strength AISI 301 stainless coil, cold-rolled to 2.8 mm thick, 900 mm wide. HTS 7219.33.0044 for general cold-rolled stainless dimensions. Spring temper for automotive.
439 Cold-Rolled Stainless Steel Coil 1.9mm Thick
Ferritic 439 stainless coil for exhaust, cold-rolled 1.9 mm, 1550 mm wide. Fits HTS 7219.33.0044 specs perfectly.
AISI 304L Low Carbon Stainless Coil 2.4mm
Low carbon 304L stainless coil, cold-rolled 2.4 mm, 2000 mm wide. HTS 7219.33.0044 classification.
316Ti Stabilized Stainless Coil 1.3mm
316Ti stainless coil cold-rolled 1.3 mm for weldability. HTS 7219.33.0044.