Incoloy 825 Cold-Rolled High-Nickel Steel Coil
Cold-rolled Incoloy 825 stainless steel coil, 42% nickel content, 2 mm thick, 1600 mm wide for corrosion-resistant applications. Fits HTS 7219.33.00.05 as high-nickel alloy steel flat-rolled product, cold-reduced, in wide coils.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not qualifying as stainless steel
Lacks sufficient chromium/physical properties for stainless definition, treated as general alloy steel coil.
If width under 1370 mm
Statistical suffix differentiates by width; narrower coils use 7219.33.0030 vs .0005 for 1370mm+.
If hot-rolled rather than cold-rolled
Processing state determines heading; hot-rolled wide stainless coils fall under 7219.22.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit chemical analysis reports proving high-nickel content distinguishing from standard stainless steels
• Measure coil width precisely; under 1370 mm shifts to other 7219.33 subheadings
• Ensure no heat-resisting or tool steel alloy compositions per US notes that could reclassify under different provisions
Related Products under HTS 7219.33.00.05
Incoloy 800H Cold-Rolled Stainless Steel Coil
Wide cold-rolled coil of Incoloy 800H, a high-nickel alloy stainless steel (around 30-35% nickel), with thickness 1.5 mm and width 1500 mm. Classified under HTS 7219.33.00.05 as flat-rolled stainless steel not further worked than cold-rolled, in coils over 1370 mm wide, of high-nickel alloy steel per chapter notes.
Hastelloy C-276 Cold-Rolled Stainless Coil
Hastelloy C-276 high-nickel alloy (57% nickel) cold-rolled stainless steel coil, 2.5 mm thickness, 1400 mm width, for severe corrosive environments. HTS 7219.33.00.05 applies to its cold-rolled, wide coil form of high-nickel stainless.
Alloy 20Cb-3 Cold-Rolled High-Nickel Coil
Cold-rolled Alloy 20Cb-3 stainless steel coil with 35% nickel, 1.8 mm thick, 1550 mm wide for sulfuric acid handling. Matches HTS 7219.33.00.05 for high-nickel stainless, cold-rolled wide coils 1-3 mm thick.
Monel 400 Cold-Rolled Stainless Steel Coil
Monel 400 nickel-copper alloy steel coil (67% nickel), cold-rolled to 2.2 mm x 1450 mm wide for marine applications. Classified HTS 7219.33.00.05 as high-nickel alloy stainless flat-rolled product in wide coils.
Inconel 625 Cold-Rolled High-Nickel Alloy Coil
Premium Inconel 625 stainless coil with 58% nickel, cold-rolled 1.2 mm thick x 1520 mm wide for gas turbine components. HTS 7219.33.00.05 for high-nickel cold-rolled stainless wide coils 1-3 mm.