Incoloy 800H Cold-Rolled Stainless Steel Coil
Wide cold-rolled coil of Incoloy 800H, a high-nickel alloy stainless steel (around 30-35% nickel), with thickness 1.5 mm and width 1500 mm. Classified under HTS 7219.33.00.05 as flat-rolled stainless steel not further worked than cold-rolled, in coils over 1370 mm wide, of high-nickel alloy steel per chapter notes.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If alloy steel not meeting stainless steel definition
High-nickel alloys without minimum chromium for stainless classification fall under Chapter 72 alloy steel headings.
If surface-treated (polished, coated, etc.)
Chapter note defines 'further worked' surface treatments like polishing or coating, moving product out of 'not further worked than cold-rolled' category.
If thickness of 1 mm or less
Thinner cold-rolled stainless coils over 1 mm thick are specifically directed to 7219.33; ≤1 mm uses 7219.32.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify nickel content exceeds typical stainless thresholds to qualify as high-nickel alloy steel per US note definitions
• Provide mill test certificates confirming cold-rolled state, exact thickness/width measurements, and stainless steel composition
• Avoid 'further worked' surface treatments like coating/polishing which shift to 7219.34+; inspect for rust/discoloration as no duty allowance per chapter notes
Related Products under HTS 7219.33.00.05
Incoloy 825 Cold-Rolled High-Nickel Steel Coil
Cold-rolled Incoloy 825 stainless steel coil, 42% nickel content, 2 mm thick, 1600 mm wide for corrosion-resistant applications. Fits HTS 7219.33.00.05 as high-nickel alloy steel flat-rolled product, cold-reduced, in wide coils.
Hastelloy C-276 Cold-Rolled Stainless Coil
Hastelloy C-276 high-nickel alloy (57% nickel) cold-rolled stainless steel coil, 2.5 mm thickness, 1400 mm width, for severe corrosive environments. HTS 7219.33.00.05 applies to its cold-rolled, wide coil form of high-nickel stainless.
Alloy 20Cb-3 Cold-Rolled High-Nickel Coil
Cold-rolled Alloy 20Cb-3 stainless steel coil with 35% nickel, 1.8 mm thick, 1550 mm wide for sulfuric acid handling. Matches HTS 7219.33.00.05 for high-nickel stainless, cold-rolled wide coils 1-3 mm thick.
Monel 400 Cold-Rolled Stainless Steel Coil
Monel 400 nickel-copper alloy steel coil (67% nickel), cold-rolled to 2.2 mm x 1450 mm wide for marine applications. Classified HTS 7219.33.00.05 as high-nickel alloy stainless flat-rolled product in wide coils.
Inconel 625 Cold-Rolled High-Nickel Alloy Coil
Premium Inconel 625 stainless coil with 58% nickel, cold-rolled 1.2 mm thick x 1520 mm wide for gas turbine components. HTS 7219.33.00.05 for high-nickel cold-rolled stainless wide coils 1-3 mm.