AISI 321 Cold-Rolled Stainless Steel Coil 3.8mm Thick
Stabilized AISI 321 stainless steel coil cold-rolled to 3.8 mm, width 1000 mm, in coil form without further working like coating or polishing. Matches HTS 7219.32.0044 for cold-rolled stainless flat products >600 mm wide, 3-4.75 mm thick, 'other' category.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If clad or coated with another material
Cladding qualifies as 'further worked' per chapter note, moving to clad subheading.
If width <600 mm and hairline/polished
Narrower and further worked products go to 7220 for other stainless flat-rolled.
If End-use as machinery components could invoke use provisions over material form.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit heat analysis for titanium stabilization confirmation; ensure no 'further worked' treatments per chapter definition; verify thickness uniformity across coil
Related Products under HTS 7219.32.00.44
AISI 304 Cold-Rolled Stainless Steel Coil 3.5mm Thick
This is a flat-rolled coil of AISI 304 austenitic stainless steel, cold-rolled to a thickness of 3.5 mm and width exceeding 600 mm, not subjected to any further surface working beyond cold reduction. It falls under HTS 7219.32.0044 as it matches the exact criteria for stainless steel coils in this thickness range (3-4.75 mm), cold-rolled, and classified as 'other' without special compositions or patterns.
AISI 316L Cold-Rolled Stainless Steel Coil 4mm Thick
AISI 316L low-carbon austenitic stainless steel coil, cold-reduced to 4 mm thickness with width over 600 mm, supplied in coil form without additional processing. Classified under HTS 7219.32.0044 due to its stainless composition, precise thickness range, cold-rolled condition, and 'other' status excluding special alloy notes.
430 Cold-Rolled Stainless Steel Coil 3.2mm Thick
Ferritic 430 grade stainless steel flat-rolled product, cold-rolled to 3.2 mm thickness, coil width 800 mm or more, not further worked. It precisely fits HTS 7219.32.0044 as a standard cold-rolled stainless coil in the 3-4.75 mm thickness band, excluding tool or heat-resisting specialties.
409 Cold-Rolled Stainless Steel Coil 4.5mm Thick
Ferritic 409 automotive-grade stainless steel, cold-reduced coil at 4.5 mm thickness and 700 mm width, untreated beyond cold-rolling. Directly classifiable in HTS 7219.32.0044 as conforming stainless steel coil specs: width ≥600 mm, thickness 3+ to <4.75 mm, not further worked.
310S Cold-Rolled Stainless Steel Coil 3.25mm Thick
High-temperature 310S austenitic stainless coil, cold-rolled to 3.25 mm, 900 mm width, in coil without polishing or other further work. Fits HTS 7219.32.0044 as standard cold-rolled stainless flat-rolled product in specified dimensions, not matching special notes.
17-4PH Cold-Rolled Stainless Steel Coil 3.7mm Thick
Precipitation-hardening 17-4PH stainless steel flat coil, cold-rolled thickness 3.7 mm, width 650 mm, not further processed. HTS 7219.32.0044 applies to this cold-rolled stainless coil meeting width/thickness criteria without special alloy exclusions.