AISI 304 Cold-Rolled Stainless Steel Coil 3.5mm Thick
This is a flat-rolled coil of AISI 304 austenitic stainless steel, cold-rolled to a thickness of 3.5 mm and width exceeding 600 mm, not subjected to any further surface working beyond cold reduction. It falls under HTS 7219.32.0044 as it matches the exact criteria for stainless steel coils in this thickness range (3-4.75 mm), cold-rolled, and classified as 'other' without special compositions or patterns.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness is less than 3 mm
Thinner cold-rolled stainless coils shift to the subheading for <3 mm thickness within the same not-further-worked category.
If width is less than 600 mm
Narrower stainless steel coils (<600 mm width) are classified under Chapter 72 heading 7220 for other flat-rolled products.
If further worked (e.g., polished or coated)
Any surface treatment like polishing or coating moves it out of 'not further worked' to subsequent subheadings under 7219.33.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificate (MTC) confirming stainless steel composition and cold-rolled status; measure thickness precisely as it must be 3-4.75mm; declare exact width to confirm >600mm eligibility
Related Products under HTS 7219.32.00.44
AISI 316L Cold-Rolled Stainless Steel Coil 4mm Thick
AISI 316L low-carbon austenitic stainless steel coil, cold-reduced to 4 mm thickness with width over 600 mm, supplied in coil form without additional processing. Classified under HTS 7219.32.0044 due to its stainless composition, precise thickness range, cold-rolled condition, and 'other' status excluding special alloy notes.
430 Cold-Rolled Stainless Steel Coil 3.2mm Thick
Ferritic 430 grade stainless steel flat-rolled product, cold-rolled to 3.2 mm thickness, coil width 800 mm or more, not further worked. It precisely fits HTS 7219.32.0044 as a standard cold-rolled stainless coil in the 3-4.75 mm thickness band, excluding tool or heat-resisting specialties.
AISI 321 Cold-Rolled Stainless Steel Coil 3.8mm Thick
Stabilized AISI 321 stainless steel coil cold-rolled to 3.8 mm, width 1000 mm, in coil form without further working like coating or polishing. Matches HTS 7219.32.0044 for cold-rolled stainless flat products >600 mm wide, 3-4.75 mm thick, 'other' category.
409 Cold-Rolled Stainless Steel Coil 4.5mm Thick
Ferritic 409 automotive-grade stainless steel, cold-reduced coil at 4.5 mm thickness and 700 mm width, untreated beyond cold-rolling. Directly classifiable in HTS 7219.32.0044 as conforming stainless steel coil specs: width ≥600 mm, thickness 3+ to <4.75 mm, not further worked.
310S Cold-Rolled Stainless Steel Coil 3.25mm Thick
High-temperature 310S austenitic stainless coil, cold-rolled to 3.25 mm, 900 mm width, in coil without polishing or other further work. Fits HTS 7219.32.0044 as standard cold-rolled stainless flat-rolled product in specified dimensions, not matching special notes.
17-4PH Cold-Rolled Stainless Steel Coil 3.7mm Thick
Precipitation-hardening 17-4PH stainless steel flat coil, cold-rolled thickness 3.7 mm, width 650 mm, not further processed. HTS 7219.32.0044 applies to this cold-rolled stainless coil meeting width/thickness criteria without special alloy exclusions.