17-4PH Precipitation Hardening Stainless Coil 3.2mm
Cold-rolled 17-4PH stainless steel coil, 3.2 mm thickness, width exceeding 600 mm, nickel >0.5%. Fits HTS 7219.32.0038 as 'other' cold-rolled stainless coil not further worked, distinguished from tool steels or other special alloys in U.S. Chapter 72 notes.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If classified as tool steel
If meeting U.S. note (e) tool steel element thresholds (e.g., high Cr/C), it moves to bars/rods of tool steel in heading 7222.
If under 600 mm width
Narrower flat-rolled stainless products (<600mm) are in 7219.21 for cold-rolled grades.
If in rectangular plate form >4.75mm
Thicker or plate configurations exceed coil/thickness specs, shifting to 'other flat-rolled'.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit material safety data sheets detailing alloy composition to confirm 'other' status vs. tool/heat-resisting steels; Ensure coil form - straightened sheets go to 7219.35; Comply with AD/CVD orders on specific stainless grades from certain countries
Related Products under HTS 7219.32.00.38
Type 304 Cold-Rolled Stainless Steel Coil 3.5mm Thick
A flat-rolled stainless steel coil of Type 304 grade, cold-rolled to a thickness of 3.5 mm and width over 600 mm, containing more than 0.5% nickel. It falls under HTS 7219.32.0038 as it is not further worked beyond cold-rolling, in coils, and meets the specified thickness and nickel content criteria from Chapter 72 notes.
Type 316L Stainless Steel Cold-Reduced Coil 4mm
Cold-reduced Type 316L stainless steel coil, 4 mm thick, over 600 mm wide, with nickel content exceeding 0.5% by weight. Classified under HTS 7219.32.0038 for cold-rolled stainless steel coils of 3-4.75 mm thickness, not further worked, and 'other' compositions per U.S. notes.
Duplex 2205 Stainless Steel Cold Coil 3.8mm Thick
Duplex 2205 grade stainless steel, cold-rolled coil form, 3.8 mm thick, >=600 mm wide, >0.5% Ni. HTS 7219.32.0038 applies to this 'other' stainless category for specified thickness range, coil, cold-reduced without further working.
321 Austenitic Stainless Cold-Rolled Coil 3mm
Type 321 stabilized austenitic stainless steel coil, precisely 3 mm thick cold-rolled, width 700 mm+, nickel >0.5%. Classified in HTS 7219.32.0038 for cold-rolled stainless coils 3mm+ to <4.75mm, 'other' non-specialty per Chapter definitions.
310S Heat-Resistant Stainless Coil 4.2mm
310S high-temperature stainless steel coil, cold-reduced to 4.2 mm, over 600 mm wide, >0.5% Ni but not meeting full heat-resisting steel note (g) due to carbon levels. HTS 7219.32.0038 for 'other' cold-rolled stainless in coils, thickness range.
Type 304H High-Carbon Stainless Coil 3.7mm
304H variant stainless steel with elevated carbon, cold-rolled coil 3.7 mm thick, >=600 mm wide, Ni >0.5%. Falls under HTS 7219.32.0038 as other cold-rolled stainless coil not matching tool steel or other special U.S. note definitions.