Type 316L Stainless Steel Cold-Rolled Coil 3.5mm
Cold-rolled stainless steel coil of 3.5mm thickness, 700mm width, containing 10-14% nickel and 2-3% molybdenum for enhanced corrosion resistance. Classified under HTS 7219.32.0036 due to its specific composition, cold-rolled state without further working, coil form, and thickness range of 3-4.75mm. Used primarily in marine and chemical processing equipment.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If molybdenum content is 1.5% or less
Lower molybdenum levels fall under the preceding subheading for similar Ni-containing cold-rolled coils.
If width under 600 mm
Narrower flat-rolled stainless products (less than 600mm width) classify in Chapter 72 heading 7220.
If thickness exceeds 4.75 mm
Thicker cold-rolled stainless coils (4.75mm+) move to the next thickness subheading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificates verifying nickel >0.5% and molybdenum 1.5-5% by weight to confirm classification
• Ensure product meets 'not further worked than cold-rolled' criteria; any polishing or coating shifts to 7219.90
• Avoid rust/discoloration claims as Chapter 72 notes deny duty reductions for such damage before entry
Related Products under HTS 7219.32.00.36
17-4 PH Precipitation Hardening Stainless Coil 3.2mm
Cold-rolled 17-4 PH stainless steel coil, 3.2mm thick, 800mm wide, with ~4% nickel and ~3.5% molybdenum for high strength applications. Fits HTS 7219.32.0036 as a not-further-worked cold-rolled product in coils with specified alloy content. Ideal for aerospace structural components.
AL-6XN Alloy Cold-Rolled Stainless Coil 4mm
4mm thick cold-rolled AL-6XN super austenitic stainless coil, 650mm width, featuring 3.8% molybdenum and 20%+ nickel for severe corrosive environments. Classified in HTS 7219.32.0036 for its cold-rolled coil form, thickness 3-4.75mm, and precise Mo/Ni composition. Used in desalination plants and flue gas desulfurization.
Custom 254 SMO Cold-Rolled Coil 3.8mm
Cold-reduced 254 SMO super austenitic stainless steel coil at 3.8mm thickness, 900mm wide, with 4.2% molybdenum and 18% nickel. Meets HTS 7219.32.0036 criteria for Ni/Mo content, coil form, cold-rolled not further worked, and width/thickness specs. Applied in pulp/paper bleaching equipment.
316Ti Stabilized Stainless Cold-Rolled Coil 3.25mm
3.25mm thick cold-rolled 316Ti stainless steel coil, 600mm+ width, with 2.5% molybdenum and 11% nickel plus titanium stabilization. HTS 7219.32.0036 applies due to cold-rolled coils not further worked, specific thickness, and alloying elements within limits. Suited for welded fabrications in chemical industry.
904L Molybdenum-Bearing Stainless Coil 4.2mm
Cold-rolled 904L stainless coil 4.2mm thick, over 700mm wide, containing 4.5% molybdenum and 25% nickel for urea production applications. Precisely matches HTS 7219.32.0036 for composition, cold-reduction process, coil presentation, and dimensional specs. Offers superior resistance to pitting corrosion.