Custom 254 SMO Cold-Rolled Coil 3.8mm
Cold-reduced 254 SMO super austenitic stainless steel coil at 3.8mm thickness, 900mm wide, with 4.2% molybdenum and 18% nickel. Meets HTS 7219.32.0036 criteria for Ni/Mo content, coil form, cold-rolled not further worked, and width/thickness specs. Applied in pulp/paper bleaching equipment.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If molybdenum ≥5%
Higher Mo content exceeds this subheading's limit and moves to subsequent 'other' category.
If hot-rolled rather than cold-rolled
Hot-rolled stainless coils of similar spec classify under heading 7219's counterpart 7219.
If narrower width or different alloy spec
7220 covers stainless flat products <600mm or non-specified compositions.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Pre-verify classification with CBP ruling if Mo content near 1.5%/5% boundaries
• Maintain coil integrity during shipping; uncoiling/recoiling may constitute further working
• Include country-of-melt documentation for Section 232 steel tariff applicability
Related Products under HTS 7219.32.00.36
Type 316L Stainless Steel Cold-Rolled Coil 3.5mm
Cold-rolled stainless steel coil of 3.5mm thickness, 700mm width, containing 10-14% nickel and 2-3% molybdenum for enhanced corrosion resistance. Classified under HTS 7219.32.0036 due to its specific composition, cold-rolled state without further working, coil form, and thickness range of 3-4.75mm. Used primarily in marine and chemical processing equipment.
17-4 PH Precipitation Hardening Stainless Coil 3.2mm
Cold-rolled 17-4 PH stainless steel coil, 3.2mm thick, 800mm wide, with ~4% nickel and ~3.5% molybdenum for high strength applications. Fits HTS 7219.32.0036 as a not-further-worked cold-rolled product in coils with specified alloy content. Ideal for aerospace structural components.
AL-6XN Alloy Cold-Rolled Stainless Coil 4mm
4mm thick cold-rolled AL-6XN super austenitic stainless coil, 650mm width, featuring 3.8% molybdenum and 20%+ nickel for severe corrosive environments. Classified in HTS 7219.32.0036 for its cold-rolled coil form, thickness 3-4.75mm, and precise Mo/Ni composition. Used in desalination plants and flue gas desulfurization.
316Ti Stabilized Stainless Cold-Rolled Coil 3.25mm
3.25mm thick cold-rolled 316Ti stainless steel coil, 600mm+ width, with 2.5% molybdenum and 11% nickel plus titanium stabilization. HTS 7219.32.0036 applies due to cold-rolled coils not further worked, specific thickness, and alloying elements within limits. Suited for welded fabrications in chemical industry.
904L Molybdenum-Bearing Stainless Coil 4.2mm
Cold-rolled 904L stainless coil 4.2mm thick, over 700mm wide, containing 4.5% molybdenum and 25% nickel for urea production applications. Precisely matches HTS 7219.32.0036 for composition, cold-reduction process, coil presentation, and dimensional specs. Offers superior resistance to pitting corrosion.