316Ti Stabilized Hot-Rolled Stainless Sheet 9mm
316Ti stabilized stainless steel hot-rolled sheet, 9 mm thick, 1300 mm wide, with 2.2% Mo and 11% Ni. Classified in HTS 7219.22.0015 for its hot-rolled, uncoiled form, alloy composition, and dimensional specs. Applied in heat exchanger manufacturing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If electrical sheet with patterns
Silicon-electrical sheets with orientations/patterns classify separately in 7219.24.
If >10.5% chromium but tool steel per note (e)
Specific tool steel compositions move to 7225 alloy steel subheadings.
If formed into pipes/tubes
Post-import tube forming changes to Chapter 73 steel tubes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document titanium stabilization doesn't alter base Mo/Ni classification
• Ensure no enameling/varnishing; such treatments are 'further worked' exclusions
• Pair with commercial invoice showing exact HTS for faster CBP processing
Related Products under HTS 7219.22.00.15
Hot-Rolled 316L Stainless Steel Plate 6mm Thick
This is a flat-rolled stainless steel plate made from 316L grade alloy, featuring approximately 2% molybdenum and 10-12% nickel content, with a thickness of 6 mm and width of 1500 mm. It is not further worked beyond hot-rolling and not in coils, fitting HTS 7219.22.0015 due to its specific composition exceeding 0.5% nickel and 1.5-5% molybdenum, thickness between 4.75-10 mm, and width not exceeding 1575 mm. Commonly used in chemical processing equipment for corrosion resistance.
UNS S31600 Hot-Rolled Stainless Steel Sheet 8mm
UNS S31600 grade hot-rolled stainless steel flat product, 8 mm thick and 1200 mm wide, containing over 10% nickel and about 2.5% molybdenum. Classified under HTS 7219.22.0015 as a not further worked, hot-rolled, coil-free product with thickness 4.75-10 mm, width ≤1575 mm, and specified alloy content. Ideal for marine applications due to enhanced pitting resistance.
AISI 316 Hot-Rolled Stainless Steel Plate 5mm Thick
AISI 316 grade flat-rolled stainless steel plate, hot-rolled to 5 mm thickness and 1400 mm width, with >0.5% nickel and 2-3% molybdenum. Meets HTS 7219.22.0015 criteria for not further worked, not in coils, specific thickness range, and width ≤1575 mm. Used in pharmaceutical equipment for its hygienic corrosion resistance.
317 Stainless Steel Hot-Rolled Plate 7.5mm 1520mm Wide
Grade 317 stainless steel hot-rolled plate with 3.5% molybdenum and 11.5% nickel, 7.5 mm thick and 1520 mm wide. Fits HTS 7219.22.0015 as hot-rolled, not further worked, not coiled, within thickness 4.75-10 mm and width ≤1575 mm. Suited for pulp and paper industry equipment.
Custom 316LMo Hot-Rolled Stainless Plate 4.8mm
316LMo variant hot-rolled stainless plate with 4% molybdenum (within 1.5-5%) and 12% nickel, 4.8 mm thick, 1550 mm wide. Precisely matches HTS 7219.22.0015 for not further worked hot-rolled stainless plates of specified dimensions and composition. Used in flue gas desulfurization systems.
AL-6XN Hot-Rolled Stainless Steel Plate 10mm
AL-6XN super-austenitic stainless hot-rolled plate, 10 mm thick, 1480 mm wide, containing 4.8% Mo and 2% Ni (meets >0.5% threshold). HTS 7219.22.0015 applies due to hot-rolled uncoiled form, alloy specs, and size limits. For severe corrosive environments like desalination plants.