Of a width not exceeding 1575 mm
Flat-rolled products of stainless steel, of a width of 600 mm or more: > Not further worked than hot-rolled, not in coils: > Of a thickness of 4.75 mm or more but not exceeding 10 mm > Other: > Containing more than 0.5 percent by weight of nickel: > Containing more than 1.5 percent but less than 5 percent by weight of molybdenum: > Of a width not exceeding 1575 mm
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Products classified under HTS 7219.22.00.15
Hot-Rolled 316L Stainless Steel Plate 6mm Thick
This is a flat-rolled stainless steel plate made from 316L grade alloy, featuring approximately 2% molybdenum and 10-12% nickel content, with a thickness of 6 mm and width of 1500 mm. It is not further worked beyond hot-rolling and not in coils, fitting HTS 7219.22.0015 due to its specific composition exceeding 0.5% nickel and 1.5-5% molybdenum, thickness between 4.75-10 mm, and width not exceeding 1575 mm. Commonly used in chemical processing equipment for corrosion resistance.
UNS S31600 Hot-Rolled Stainless Steel Sheet 8mm
UNS S31600 grade hot-rolled stainless steel flat product, 8 mm thick and 1200 mm wide, containing over 10% nickel and about 2.5% molybdenum. Classified under HTS 7219.22.0015 as a not further worked, hot-rolled, coil-free product with thickness 4.75-10 mm, width ≤1575 mm, and specified alloy content. Ideal for marine applications due to enhanced pitting resistance.
AISI 316 Hot-Rolled Stainless Steel Plate 5mm Thick
AISI 316 grade flat-rolled stainless steel plate, hot-rolled to 5 mm thickness and 1400 mm width, with >0.5% nickel and 2-3% molybdenum. Meets HTS 7219.22.0015 criteria for not further worked, not in coils, specific thickness range, and width ≤1575 mm. Used in pharmaceutical equipment for its hygienic corrosion resistance.
317 Stainless Steel Hot-Rolled Plate 7.5mm 1520mm Wide
Grade 317 stainless steel hot-rolled plate with 3.5% molybdenum and 11.5% nickel, 7.5 mm thick and 1520 mm wide. Fits HTS 7219.22.0015 as hot-rolled, not further worked, not coiled, within thickness 4.75-10 mm and width ≤1575 mm. Suited for pulp and paper industry equipment.
316Ti Stabilized Hot-Rolled Stainless Sheet 9mm
316Ti stabilized stainless steel hot-rolled sheet, 9 mm thick, 1300 mm wide, with 2.2% Mo and 11% Ni. Classified in HTS 7219.22.0015 for its hot-rolled, uncoiled form, alloy composition, and dimensional specs. Applied in heat exchanger manufacturing.
Custom 316LMo Hot-Rolled Stainless Plate 4.8mm
316LMo variant hot-rolled stainless plate with 4% molybdenum (within 1.5-5%) and 12% nickel, 4.8 mm thick, 1550 mm wide. Precisely matches HTS 7219.22.0015 for not further worked hot-rolled stainless plates of specified dimensions and composition. Used in flue gas desulfurization systems.
AL-6XN Hot-Rolled Stainless Steel Plate 10mm
AL-6XN super-austenitic stainless hot-rolled plate, 10 mm thick, 1480 mm wide, containing 4.8% Mo and 2% Ni (meets >0.5% threshold). HTS 7219.22.0015 applies due to hot-rolled uncoiled form, alloy specs, and size limits. For severe corrosive environments like desalination plants.
254 SMO Hot-Rolled Stainless Sheet 6.5mm Thick
254 SMO high-molybdenum stainless hot-rolled sheet, 6.5 mm x 1450 mm, with 1.8% Mo (1.5-5%) and 18% Ni. Classifies under HTS 7219.22.0015 for precise alloy, thickness, width, and processing specs. Used in offshore oil & gas platforms.
316H High-Temp Hot-Rolled Stainless Plate 4.75mm
316H high-temperature grade hot-rolled stainless plate at minimum 4.75 mm thickness, 1500 mm wide, 2.1% Mo, 11% Ni. HTS 7219.22.0015 due to exact dimensional and compositional match for not further worked plates. For elevated-temperature pressure vessels.
Uranus B6 Mo-Rich Hot-Rolled Plate 5.5mm
Uranus B6 molybdenum-rich stainless hot-rolled plate, 5.5 mm thick, 1570 mm wide (max), 4.2% Mo, 6.5% Ni. Perfect fit for HTS 7219.22.0015 uncoiled hot-rolled specs. Corrosion-resistant for flue gas cleaning systems.