Type 321 Hot-Rolled Stainless Steel Coil
Hot-rolled Type 321 stainless coil stabilized with titanium, containing 17-19% chromium and 9-12% nickel, 3-4.75 mm thick, coil width over 600 mm. Matches HTS 7219.13.0071 for hot-rolled stainless with specified nickel content, no further working. Suited for high-temperature exhaust systems.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness under 3 mm and hot-rolled
Sub-3 mm thickness in hot-rolled coils uses 7219.12 or related, distinct from 3+ mm products in the same series.
If imported as tubes made from this coil
If pre-formed into tubes or pipes before import, classification shifts from flat-rolled Chapter 72 to tubes/pipes in 7304.
If containing 0.5% or less nickel
Lower nickel content (≤0.5%) directs to separate statistical suffix within the same thickness/width hot-rolled category.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document stabilization elements to prevent confusion with standard austenitic grades; ensure coils remain in hot-rolled black finish without coatings; check for Section 232 tariffs on steel imports
Related Products under HTS 7219.13.00.71
Type 304 Hot-Rolled Stainless Steel Coil
Hot-rolled stainless steel coil of Type 304 grade, featuring 18% chromium and 8-10.5% nickel content, with thickness between 3-4.75 mm and width over 600 mm. Classified under HTS 7219.13.0071 as not further worked hot-rolled coil containing more than 0.5% but less than 24% nickel. Used in applications requiring corrosion resistance like chemical processing equipment.
Type 316 Hot-Rolled Stainless Steel Coil
Type 316 stainless steel hot-rolled coil with 16-18% chromium, 10-14% nickel, and 2-3% molybdenum for enhanced corrosion resistance, thickness 3-4.75 mm, width ≥600 mm. Fits HTS 7219.13.0071 as hot-rolled, not further worked, with nickel between 0.5-24%. Ideal for marine and pharmaceutical applications.
Type 347 Hot-Rolled Stainless Steel Coil
Type 347 hot-rolled stainless steel coil with columbium stabilization, 17-19% Cr, 9-13% Ni, thickness 3-4.75 mm, width 600+ mm, not further worked. Precisely under HTS 7219.13.0071 due to nickel range and hot-rolled coil form. Used in aircraft and pressure vessels.
310 Stainless Hot-Rolled Coil for Furnace Parts
High-temperature Type 310 stainless hot-rolled coil, 24-26% Cr, 19-22% Ni, 3-4.75 mm thick, ≥600 mm wide, black hot-rolled surface. Classed in HTS 7219.13.0071 for nickel content under 24% and no further working. Designed for furnace linings and heat exchangers.
Type 317LMN Hot-Rolled Stainless Steel Coil
Low-carbon Type 317LMN stainless coil for sour service, with 18-20% Cr, 13.5-17.5% Ni, 4-4.75 mm thick, wide coil format. HTS 7219.13.0071 applies for hot-rolled, nickel-spec compliant stainless products. Used in oil/gas piping.
Type 904L Hot-Rolled Stainless Steel Coil
Premium Type 904L hot-rolled coil with high nickel (23-28% but import certified <24%), 19-23% Cr, 3.5mm thick, 700mm width. Fits HTS 7219.13.0071 as other hot-rolled stainless coil with defined nickel range. For chemical industry vessels.