Type 316 Hot-Rolled Stainless Steel Coil
Type 316 stainless steel hot-rolled coil with 16-18% chromium, 10-14% nickel, and 2-3% molybdenum for enhanced corrosion resistance, thickness 3-4.75 mm, width ≥600 mm. Fits HTS 7219.13.0071 as hot-rolled, not further worked, with nickel between 0.5-24%. Ideal for marine and pharmaceutical applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness 4.75 mm or more
Thicker hot-rolled coils ≥4.75 mm are classified under 7219.14, separating by thickness within the same nickel range and processing.
If electrolytically polished surface
Any 'further worked' treatment like polishing shifts from hot-rolled not-further-worked 7219.13 to worked headings like 7219.33.
If width under 600 mm
Narrower stainless bars/rod-like products under 600 mm width move to Chapter 72 headings for narrower flat-rolled forms.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide chemical analysis confirming molybdenum addition doesn't alter nickel classification; inspect for any surface treatments that could deem it 'further worked'; use NAFTA certificates if applicable for duty relief
Related Products under HTS 7219.13.00.71
Type 304 Hot-Rolled Stainless Steel Coil
Hot-rolled stainless steel coil of Type 304 grade, featuring 18% chromium and 8-10.5% nickel content, with thickness between 3-4.75 mm and width over 600 mm. Classified under HTS 7219.13.0071 as not further worked hot-rolled coil containing more than 0.5% but less than 24% nickel. Used in applications requiring corrosion resistance like chemical processing equipment.
Type 321 Hot-Rolled Stainless Steel Coil
Hot-rolled Type 321 stainless coil stabilized with titanium, containing 17-19% chromium and 9-12% nickel, 3-4.75 mm thick, coil width over 600 mm. Matches HTS 7219.13.0071 for hot-rolled stainless with specified nickel content, no further working. Suited for high-temperature exhaust systems.
Type 347 Hot-Rolled Stainless Steel Coil
Type 347 hot-rolled stainless steel coil with columbium stabilization, 17-19% Cr, 9-13% Ni, thickness 3-4.75 mm, width 600+ mm, not further worked. Precisely under HTS 7219.13.0071 due to nickel range and hot-rolled coil form. Used in aircraft and pressure vessels.
310 Stainless Hot-Rolled Coil for Furnace Parts
High-temperature Type 310 stainless hot-rolled coil, 24-26% Cr, 19-22% Ni, 3-4.75 mm thick, ≥600 mm wide, black hot-rolled surface. Classed in HTS 7219.13.0071 for nickel content under 24% and no further working. Designed for furnace linings and heat exchangers.
Type 317LMN Hot-Rolled Stainless Steel Coil
Low-carbon Type 317LMN stainless coil for sour service, with 18-20% Cr, 13.5-17.5% Ni, 4-4.75 mm thick, wide coil format. HTS 7219.13.0071 applies for hot-rolled, nickel-spec compliant stainless products. Used in oil/gas piping.
Type 904L Hot-Rolled Stainless Steel Coil
Premium Type 904L hot-rolled coil with high nickel (23-28% but import certified <24%), 19-23% Cr, 3.5mm thick, 700mm width. Fits HTS 7219.13.0071 as other hot-rolled stainless coil with defined nickel range. For chemical industry vessels.