AL-6XN Hot-Rolled Stainless Steel Coil
AL-6XN super-austenitic stainless steel hot-rolled coil, 3.6 mm thick, 900 mm wide, containing 20-22% nickel and 3.5% molybdenum. Perfectly fits HTS 7219.13.00.51 criteria for chemical industry plate stock not further worked beyond hot-rolling.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If under 0.5% nickel content
Very low nickel stainless compositions fall outside the 7219.13 nickel range into 7219.24.
If in semi-finished blooms/slabs
Less processed semi-finished steel products precede flat-rolled in Chapter 72 sequence.
If cold-rolled, 3mm+ thick
Cold-rolling changes processing state from hot-rolled, moving to 7219.33 subheading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Super-austenitic grades need detailed PMI (positive material identification) for high Ni/Mo verification
• Separate from universal mill plate shipments; coil vs plate distinction affects universal mill note (b)
• Watch AD/CVD orders on stainless from specific countries; country-of-melt documentation critical
Related Products under HTS 7219.13.00.51
Type 316L Hot-Rolled Stainless Steel Coil
Hot-rolled stainless steel coil, 3.5 mm thick and 1,200 mm wide, containing 10-14% nickel and 2-3% molybdenum for enhanced corrosion resistance. Classified under HTS 7219.13.00.51 due to its stainless steel composition, hot-rolled in coils, thickness between 3-4.75 mm, and specific Ni/Mo content. Used primarily for marine and chemical processing equipment.
316Ti Stabilized Stainless Steel Hot Coil
Hot-rolled coil of 316Ti stainless steel, 3.8 mm thick, 1,500 mm wide, with 11% nickel and 2.5% molybdenum plus titanium stabilization. Fits HTS 7219.13.00.51 for its hot-rolled state in coils, specified thickness, and Ni/Mo percentages ideal for high-temperature applications.
317 Stainless Steel Hot-Rolled Coil
317 grade stainless steel hot-rolled in coils, 3.2 mm thickness, 1,000 mm width, featuring 11-14% nickel and 3-4% molybdenum for superior pitting resistance. Matches HTS 7219.13.00.51 exactly as not further worked hot-rolled stainless coil with required alloy specs.
Duplex 2205 Hot-Rolled Stainless Coil
Duplex 2205 (UNS S31803) stainless steel hot-rolled coil, 4.2 mm thick, 1,800 mm wide, with 4.5-6.5% nickel and 2.5-3.5% molybdenum. Classified in HTS 7219.13.00.51 for hot-rolled, coiled form, thickness range, and meeting Ni/Mo alloy thresholds for offshore structures.
Custom 317LMN Hot Band Steel Coil
Custom 317LMN stainless hot band (coil), 4.0 mm gauge, 1,400 mm width, with 13.5% nickel and 4.2% molybdenum for urea plant fabrication. HTS 7219.13.00.51 applies to this hot-rolled, coiled stainless with precise alloying meeting thickness and element specs.
254 SMO Hot-Rolled Coil Stock
254 SMO (UNS S31254) super stainless hot-rolled coil, 3.4 mm thick, 1,600 mm wide, 17.5-18.5% nickel, 4% molybdenum. Directly under HTS 7219.13.00.51 for hot-rolled coil form, width over 600 mm, and matching Ni/Mo for seawater applications.