316Ti Stabilized Stainless Steel Hot Coil
Hot-rolled coil of 316Ti stainless steel, 3.8 mm thick, 1,500 mm wide, with 11% nickel and 2.5% molybdenum plus titanium stabilization. Fits HTS 7219.13.00.51 for its hot-rolled state in coils, specified thickness, and Ni/Mo percentages ideal for high-temperature applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If clad, coated, or painted
Surface treatments like cladding or coating qualify as 'further worked' under Chapter notes, shifting to 7219.90.
If alloy steel not qualifying as stainless
If chromium <10.5% or doesn't meet stainless criteria, it falls under other alloy flat products in 7222.
If 4.75 mm or thicker
Thicker hot-rolled coils (>=4.75 mm) are in 7219.12 subheading per thickness hierarchy.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit chemical analysis reports confirming molybdenum between 1.5-5% and nickel range to CBP upon entry
• Avoid bundling with cold-rolled products; mixed shipments require separate invoices by processing state
• Check for rust/discoloration allowances per Chapter 72 note; no duty reduction for pre-entry surface issues
Related Products under HTS 7219.13.00.51
Type 316L Hot-Rolled Stainless Steel Coil
Hot-rolled stainless steel coil, 3.5 mm thick and 1,200 mm wide, containing 10-14% nickel and 2-3% molybdenum for enhanced corrosion resistance. Classified under HTS 7219.13.00.51 due to its stainless steel composition, hot-rolled in coils, thickness between 3-4.75 mm, and specific Ni/Mo content. Used primarily for marine and chemical processing equipment.
317 Stainless Steel Hot-Rolled Coil
317 grade stainless steel hot-rolled in coils, 3.2 mm thickness, 1,000 mm width, featuring 11-14% nickel and 3-4% molybdenum for superior pitting resistance. Matches HTS 7219.13.00.51 exactly as not further worked hot-rolled stainless coil with required alloy specs.
Duplex 2205 Hot-Rolled Stainless Coil
Duplex 2205 (UNS S31803) stainless steel hot-rolled coil, 4.2 mm thick, 1,800 mm wide, with 4.5-6.5% nickel and 2.5-3.5% molybdenum. Classified in HTS 7219.13.00.51 for hot-rolled, coiled form, thickness range, and meeting Ni/Mo alloy thresholds for offshore structures.
AL-6XN Hot-Rolled Stainless Steel Coil
AL-6XN super-austenitic stainless steel hot-rolled coil, 3.6 mm thick, 900 mm wide, containing 20-22% nickel and 3.5% molybdenum. Perfectly fits HTS 7219.13.00.51 criteria for chemical industry plate stock not further worked beyond hot-rolling.
Custom 317LMN Hot Band Steel Coil
Custom 317LMN stainless hot band (coil), 4.0 mm gauge, 1,400 mm width, with 13.5% nickel and 4.2% molybdenum for urea plant fabrication. HTS 7219.13.00.51 applies to this hot-rolled, coiled stainless with precise alloying meeting thickness and element specs.
254 SMO Hot-Rolled Coil Stock
254 SMO (UNS S31254) super stainless hot-rolled coil, 3.4 mm thick, 1,600 mm wide, 17.5-18.5% nickel, 4% molybdenum. Directly under HTS 7219.13.00.51 for hot-rolled coil form, width over 600 mm, and matching Ni/Mo for seawater applications.