Hot-Rolled 316L Stainless Steel Coil
Hot-rolled stainless steel coil, 6 mm thick and 1,200 mm wide, containing 2.5% molybdenum and 11% nickel for enhanced corrosion resistance. Classified under HTS 7219.12.00.66 as flat-rolled stainless steel not further worked than hot-rolled, in coils, 4.75-10 mm thick, with >0.5% Ni and 1.5-5% Mo. Used in chemical processing equipment due to its pitting resistance.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness under 4.75 mm
Thinner hot-rolled coils fall under the 7219.11 thickness range while maintaining same alloy specs.
If width under 600 mm
Narrower flat-rolled stainless steel products are classified in Chapter 72 heading 7220.
If cold-rolled instead of hot-rolled
Cold-rolled versions of the same alloy composition move to 7219.32 as further worked products.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificates verifying molybdenum (1.5-5%) and nickel (>0.5%) content to avoid reclassification
• Ensure product meets 'not further worked than hot-rolled' criteria—no polishing or coating allowed
• Declare exact thickness and width; exceeding 10 mm shifts to different subheading
Related Products under HTS 7219.12.00.66
317 Stainless Steel Hot-Rolled Coil
Type 317 stainless steel hot-rolled coil, 8 mm thick, 1,000 mm wide, with 3.2% molybdenum and 12% nickel for superior corrosion resistance in marine environments. Fits HTS 7219.12.00.66 due to hot-rolled in coils form, specified thickness, and alloy composition limits. Ideal for heat exchanger plates.
Hot-Rolled 316Ti Stabilized Stainless Coil
316Ti variant stainless steel hot-rolled coil with 2.8% molybdenum, 11.5% nickel, stabilized with titanium, 5 mm thick and 900 mm wide. Meets HTS 7219.12.00.66 criteria for composition and hot-rolled coil form not exceeding 10 mm thickness. Used in welded structures requiring intergranular corrosion resistance.
Marine-Grade 317L Hot-Rolled Steel Coil
Low-carbon 317L stainless steel hot-rolled coil, 7.5 mm thick, 1,500 mm wide, featuring 3.5% molybdenum and 13% nickel for extreme pitting resistance. Classified in HTS 7219.12.00.66 for its hot-rolled coil form and precise alloy specs. Primarily for offshore platforms and desalination plants.
Chemical Processing 316H High-Temp Coil
High-carbon 316H stainless steel hot-rolled coil optimized for elevated temperatures, 4.8 mm thick with 2.2% molybdenum and 10.8% nickel, 1,100 mm wide. Falls under HTS 7219.12.00.66 as hot-rolled stainless coil within thickness range and alloy parameters. Suited for furnace components.