Monel 400 Hot-Rolled Nickel Alloy Steel Coil
Monel 400 high-nickel alloy (67% Ni, copper-nickel steel) hot-rolled coil, 7.5 mm thick, 800 mm wide, for marine and chemical uses. HTS 7219.12.00.06 due to stainless steel classification, high-nickel content, hot-rolled in coils without further working.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness 3-4.75 mm range
Intermediate thickness hot-rolled coils have dedicated subheading 7219.13.
If semi-finished (not fully hot-rolled to final gauge)
Semi-finished products before hot-rolling to flat-rolled form go to 7207.
If electrical resistance alloy rather than structural
Special electrical stainless alloys classified under 7226, end-use based.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• High-nickel alloys like Monel require nickel % certification; mismatches lead to 7219.90 reclassification
• Verify 'not further worked' status - any polishing disqualifies from 7219.12
• Coil weight declarations must match physical inspection to avoid shortages claims denial
Related Products under HTS 7219.12.00.06
Incoloy 825 Hot-Rolled Alloy Steel Coil
High-nickel Incoloy 825 stainless steel coil, hot-rolled with 38-46% nickel content, thickness 4.75-10 mm, width over 600 mm, used in chemical processing equipment. Fits HTS 7219.12.00.06 as not further worked hot-rolled in coils of high-nickel alloy steel, distinguished by its alloy composition per U.S. notes.
Alloy 20Cb-3 Hot-Rolled High-Nickel Coil
Alloy 20Cb-3 stainless steel coil (high-nickel with ~35% Ni), hot-rolled 6 mm thick, 700 mm wide, for sulfuric acid handling. Classed in HTS 7219.12.00.06 for high-nickel alloy steel flat-rolled products, hot-rolled in coils, thickness 4.75-10 mm, not further worked.
Custom 625 (Inconel 625) Hot-Rolled Coil
Inconel 625 (Alloy 625) high-nickel superalloy steel coil (~58% Ni), hot-rolled 8 mm thick, ≥600 mm wide for aerospace and nuclear applications. Precisely matches HTS 7219.12.00.06: stainless, high-nickel, hot-rolled coils 4.75-10 mm, not further worked.
Nickel 200/201 Hot-Rolled Alloy Coil
Commercially pure Nickel 200/201 (high-nickel >99% Ni) steel equivalent, hot-rolled coil 9 mm thick, ≥600 mm, for electronics and food processing. Classified HTS 7219.12.00.06 as high-nickel alloy stainless steel, meeting width/thickness/coil criteria.
Incoloy 800H Hot-Rolled Stainless Steel Coil
Hot-rolled stainless steel coil made from Incoloy 800H, a high-nickel alloy steel containing over 30% nickel and significant chromium, with thickness between 4.75 mm and 10 mm and width exceeding 600 mm. Classified under HTS 7219.12.00.06 as flat-rolled stainless steel not further worked than hot-rolled, in coils, specifically of high-nickel alloy steel per Chapter 72 notes. Used primarily in high-temperature applications like heat exchangers.
Hastelloy C-276 Hot-Rolled Stainless Coil
Hastelloy C-276, a nickel-molybdenum-chromium superalloy with ~57% nickel, supplied as hot-rolled coil 5-9 mm thick, ≥600 mm wide for severe corrosive environments. HTS 7219.12.00.06 applies to its high-nickel alloy steel status, hot-rolled in coils without further working.