Hastelloy C-276 Hot-Rolled Stainless Coil
Hastelloy C-276, a nickel-molybdenum-chromium superalloy with ~57% nickel, supplied as hot-rolled coil 5-9 mm thick, ≥600 mm wide for severe corrosive environments. HTS 7219.12.00.06 applies to its high-nickel alloy steel status, hot-rolled in coils without further working.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness exceeding 10 mm
Thicker hot-rolled coils (>10 mm) classified under 7219.14 per thickness-based HTS breakdown.
If further worked and of high-strength steel specs
Further worked high-strength stainless shifts to 7220; 'high-strength steel' defined in notes (a).
If imported as tubes rather than flat-rolled
Fabricated into tubes, it becomes steel tubes under heading 7304, not flat products of 7219.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit detailed alloy composition docs; high-nickel superalloys like Hastelloy require verification against Chapter definitions
• Inspect for coil form and exact thickness to match 7219.12.00.06; deviations lead to different subheadings
Related Products under HTS 7219.12.00.06
Incoloy 825 Hot-Rolled Alloy Steel Coil
High-nickel Incoloy 825 stainless steel coil, hot-rolled with 38-46% nickel content, thickness 4.75-10 mm, width over 600 mm, used in chemical processing equipment. Fits HTS 7219.12.00.06 as not further worked hot-rolled in coils of high-nickel alloy steel, distinguished by its alloy composition per U.S. notes.
Alloy 20Cb-3 Hot-Rolled High-Nickel Coil
Alloy 20Cb-3 stainless steel coil (high-nickel with ~35% Ni), hot-rolled 6 mm thick, 700 mm wide, for sulfuric acid handling. Classed in HTS 7219.12.00.06 for high-nickel alloy steel flat-rolled products, hot-rolled in coils, thickness 4.75-10 mm, not further worked.
Monel 400 Hot-Rolled Nickel Alloy Steel Coil
Monel 400 high-nickel alloy (67% Ni, copper-nickel steel) hot-rolled coil, 7.5 mm thick, 800 mm wide, for marine and chemical uses. HTS 7219.12.00.06 due to stainless steel classification, high-nickel content, hot-rolled in coils without further working.
Custom 625 (Inconel 625) Hot-Rolled Coil
Inconel 625 (Alloy 625) high-nickel superalloy steel coil (~58% Ni), hot-rolled 8 mm thick, ≥600 mm wide for aerospace and nuclear applications. Precisely matches HTS 7219.12.00.06: stainless, high-nickel, hot-rolled coils 4.75-10 mm, not further worked.
Nickel 200/201 Hot-Rolled Alloy Coil
Commercially pure Nickel 200/201 (high-nickel >99% Ni) steel equivalent, hot-rolled coil 9 mm thick, ≥600 mm, for electronics and food processing. Classified HTS 7219.12.00.06 as high-nickel alloy stainless steel, meeting width/thickness/coil criteria.
Incoloy 800H Hot-Rolled Stainless Steel Coil
Hot-rolled stainless steel coil made from Incoloy 800H, a high-nickel alloy steel containing over 30% nickel and significant chromium, with thickness between 4.75 mm and 10 mm and width exceeding 600 mm. Classified under HTS 7219.12.00.06 as flat-rolled stainless steel not further worked than hot-rolled, in coils, specifically of high-nickel alloy steel per Chapter 72 notes. Used primarily in high-temperature applications like heat exchangers.