Cold-Formed Carbon Steel L-Angle 2x2x1/4 Inch
A 2x2 inch L-shaped angle bar with 1/4 inch thickness, made from nonalloy carbon steel and produced via cold-forming process. Classified under HTS 7216.69.00.00 as an angle shape of nonalloy steel, not further worked beyond cold-forming. Used in structural framing and machinery supports.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| šØš³China | Free | +35.0% | 35% |
| š²š½Mexico | Free | +10.0% | 10% |
| šØš¦Canada | Free | +10.0% | 10% |
| š©šŖGermany | Free | +10.0% | 10% |
| šÆšµJapan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If hot-rolled rather than cold-formed
Hot-rolled angles and shapes of nonalloy steel are classified separately in 7216.21, based on production method.
If assembled into structures or frames
Fabricated steel structures from these shapes fall under Chapter 73 as finished articles, not semi-finished profiles.
If further worked like painted or coated
Any surface treatment beyond cold-finishing (e.g., painting) moves to 'other' further worked category per Chapter 72 notes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
ā¢ Verify steel is nonalloy (less than 10% total alloying elements) via mill test certificate to avoid reclassification to Chapter 72 alloy headings
ā¢ Ensure documentation proves cold-formed process only, no further working like coating or polishing which shifts to 7216.99
Related Products under HTS 7216.69.00.00
Cold-Finished Nonalloy Steel U-Channel 4x2x3/16 Inch
A U-shaped channel section measuring 4 inches deep by 2 inches wide with 3/16 inch thickness, cold-finished from nonalloy steel. Falls under HTS 7216.69.00.00 for cold-formed shapes other than hollow sections. Commonly used in construction framing and shelving supports.
Cold-Formed Carbon Steel Z-Purlin 8 Inch
Z-shaped purlin profile, 8 inches deep, cold-formed from nonalloy steel for roofing and wall support systems. Classified in HTS 7216.69.00.00 as other cold-formed shapes. Provides superior load distribution in metal buildings.
Cold-Formed Steel C-Purlin 10 Inch Depth
C-shaped purlin with 10 inch depth, cold-formed nonalloy steel profile for structural roof support. Under HTS 7216.69.00.00 as other cold-formed shapes, not hollow. Essential for pre-engineered metal buildings.
Cold-Rolled Nonalloy Steel Equal Leg Angle 1.5x1.5x1/8 Inch
Equal leg L-angle, 1.5x1.5 inch legs with 1/8 inch thickness, cold-rolled carbon steel. HTS 7216.69.00.00 for cold-formed angles of nonalloy steel. Used in light framing and racking systems.
Cold-Formed Steel Lip Channel 3x1.25x12 Gauge
Lipped C-channel profile (3 inch height, 1.25 inch lip, 12 gauge), cold-formed nonalloy steel. Classifies under HTS 7216.69.00.00 as other cold-formed sections. Popular for stud framing in commercial construction.
Cold-Finished Carbon Steel Unequal Angle 4x2x3/8 Inch
Unequal leg angle bar, 4x2 inch legs with 3/8 inch thickness, cold-finished nonalloy steel. HTS 7216.69.00.00 covers such other angles. Applied in stair stringers and brackets.