Cold-Finished Nonalloy Steel U-Channel 4x2x3/16 Inch
A U-shaped channel section measuring 4 inches deep by 2 inches wide with 3/16 inch thickness, cold-finished from nonalloy steel. Falls under HTS 7216.69.00.00 for cold-formed shapes other than hollow sections. Commonly used in construction framing and shelving supports.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| šØš³China | Free | +35.0% | 35% |
| š²š½Mexico | Free | +10.0% | 10% |
| šØš¦Canada | Free | +10.0% | 10% |
| š©šŖGermany | Free | +10.0% | 10% |
| šÆšµJapan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If cold-formed hollow sections like rectangular tube
Hollow profiles, even cold-formed, are classified separately from open sections like U-channels.
If cold-formed but with drilled holes or cut lengths for specific use
Additional working like punching changes from 'not further worked' to other categories.
If for concrete reinforcing applications with deformations
If shaped as deformed bars/rods per US note (c), classifies as reinforcing bars under 7308 or related.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
ā¢ Provide precise dimensional specs and cold-forming certification; mismatches lead to CBP reclassification
ā¢ Confirm nonalloy status - alloy steel shapes go to 7228.70, potentially higher duties
ā¢ Avoid declaring in coils if straight lengths only; coiled products may shift to flat-rolled headings
Related Products under HTS 7216.69.00.00
Cold-Formed Carbon Steel Z-Purlin 8 Inch
Z-shaped purlin profile, 8 inches deep, cold-formed from nonalloy steel for roofing and wall support systems. Classified in HTS 7216.69.00.00 as other cold-formed shapes. Provides superior load distribution in metal buildings.
Cold-Formed Steel C-Purlin 10 Inch Depth
C-shaped purlin with 10 inch depth, cold-formed nonalloy steel profile for structural roof support. Under HTS 7216.69.00.00 as other cold-formed shapes, not hollow. Essential for pre-engineered metal buildings.
Cold-Rolled Nonalloy Steel Equal Leg Angle 1.5x1.5x1/8 Inch
Equal leg L-angle, 1.5x1.5 inch legs with 1/8 inch thickness, cold-rolled carbon steel. HTS 7216.69.00.00 for cold-formed angles of nonalloy steel. Used in light framing and racking systems.
Cold-Formed Steel Lip Channel 3x1.25x12 Gauge
Lipped C-channel profile (3 inch height, 1.25 inch lip, 12 gauge), cold-formed nonalloy steel. Classifies under HTS 7216.69.00.00 as other cold-formed sections. Popular for stud framing in commercial construction.
Cold-Finished Carbon Steel Unequal Angle 4x2x3/8 Inch
Unequal leg angle bar, 4x2 inch legs with 3/8 inch thickness, cold-finished nonalloy steel. HTS 7216.69.00.00 covers such other angles. Applied in stair stringers and brackets.
Cold-Rolled Steel Omega Profile 2 Inch
Omega-shaped (Ī©) profile, 2 inch width, cold-rolled from nonalloy steel for ceiling suspension systems. Falls under HTS 7216.69.00.00 as other cold-formed shapes. Provides grid support in commercial interiors.