Cold-Finished Nonalloy Steel Hat Channel 6x2.5x14 Gauge
Hat-shaped channel (6 inch depth, 2.5 inch width, 14 gauge), cold-finished from carbon steel. HTS 7216.69.00.00 for other cold-formed nonalloy sections. Used in drywall framing and ceiling grids.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| šØš³China | Free | +35.0% | 35% |
| š²š½Mexico | Free | +10.0% | 10% |
| šØš¦Canada | Free | +10.0% | 10% |
| š©šŖGermany | Free | +10.0% | 10% |
| šÆšµJapan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If galvanized or primed surface treatment
Coatings count as 'further worked' per Chapter 72 US note definition.
If cut and assembled into panels
Fabricated building components become structures under 7308.
If for high-strength alloy variants
If meets high-strength steel definition (US note a), classifies as alloy.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
ā¢ Gauge thickness must match declared specs; discrepancies cause valuation issues
ā¢ No further working allowed - even phosphatizing per Chapter notes moves to 7216.99
Related Products under HTS 7216.69.00.00
Cold-Finished Nonalloy Steel U-Channel 4x2x3/16 Inch
A U-shaped channel section measuring 4 inches deep by 2 inches wide with 3/16 inch thickness, cold-finished from nonalloy steel. Falls under HTS 7216.69.00.00 for cold-formed shapes other than hollow sections. Commonly used in construction framing and shelving supports.
Cold-Formed Carbon Steel Z-Purlin 8 Inch
Z-shaped purlin profile, 8 inches deep, cold-formed from nonalloy steel for roofing and wall support systems. Classified in HTS 7216.69.00.00 as other cold-formed shapes. Provides superior load distribution in metal buildings.
Cold-Formed Steel C-Purlin 10 Inch Depth
C-shaped purlin with 10 inch depth, cold-formed nonalloy steel profile for structural roof support. Under HTS 7216.69.00.00 as other cold-formed shapes, not hollow. Essential for pre-engineered metal buildings.
Cold-Rolled Nonalloy Steel Equal Leg Angle 1.5x1.5x1/8 Inch
Equal leg L-angle, 1.5x1.5 inch legs with 1/8 inch thickness, cold-rolled carbon steel. HTS 7216.69.00.00 for cold-formed angles of nonalloy steel. Used in light framing and racking systems.
Cold-Formed Steel Lip Channel 3x1.25x12 Gauge
Lipped C-channel profile (3 inch height, 1.25 inch lip, 12 gauge), cold-formed nonalloy steel. Classifies under HTS 7216.69.00.00 as other cold-formed sections. Popular for stud framing in commercial construction.
Cold-Finished Carbon Steel Unequal Angle 4x2x3/8 Inch
Unequal leg angle bar, 4x2 inch legs with 3/8 inch thickness, cold-finished nonalloy steel. HTS 7216.69.00.00 covers such other angles. Applied in stair stringers and brackets.