Hot-Rolled Junior I-Beam 55x30x4 mm
Junior-sized hot-rolled I-beam nonalloy steel, 55 mm height, 30 mm flange, 4 mm thick, for DIY framing. Under HTS 7216.10.0050 as other I-sections <80 mm hot-rolled. Basic nonalloy per definitions.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If L-sections instead of I
Angles (L-sections) have separate 7216.40 subheading from U/I/H.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document straightness tolerances as hot-rolled products may have minor bends not constituting working
• Avoid retail packaging; bulk import keeps primary shape classification
Related Products under HTS 7216.10.00.50
Hot-Rolled U-Channel 75x50x5 mm
A hot-rolled U-section made from nonalloy steel, measuring 75 mm in height and 50 mm in width with 5 mm thickness, used in light structural framing. It falls under HTS 7216.10.0050 as a U-section not further worked than hot-rolled, with height less than 80 mm, and classified as 'other' within this subheading. Nonalloy steel composition ensures placement in heading 7216.
Hot-Rolled I-Beam 65x40x4.5 mm
Hot-rolled I-section of nonalloy steel, 65 mm height, 40 mm flange width, and 4.5 mm web thickness, suitable for small building supports. Classified under HTS 7216.10.0050 for I-sections under 80 mm height, hot-rolled without further working, in the 'other' category. Excludes any alloying per Chapter 72 definitions.
Extruded H-Section 70x50x6 mm
Extruded H-profile from nonalloy steel, 70 mm height, 50 mm width, 6 mm thickness, used in machinery framing. Fits HTS 7216.10.0050 as H-sections under 80 mm, not further worked than extruded, 'other' subheading. Adheres to nonalloy steel per Chapter 72.
Hot-Drawn U-Profile 60x45x5 mm
Hot-drawn U-section nonalloy steel bar, 60 mm height, 45 mm width, 5 mm flange, for lightweight construction. Under HTS 7216.10.0050 for U-sections <80 mm, hot-drawn without further working, other category. Nonalloy per chapter definitions.
Hot-Rolled H-Bar 78x55x7 mm
Hot-rolled H-section nonalloy steel, 78 mm height, 55 mm flange, 7 mm thickness, for temporary supports. HTS 7216.10.0050 applies to H-sections <80 mm, hot-rolled, other. Strictly nonalloy and not further worked.
Extruded I-Section 50x35x4 mm
Extruded nonalloy steel I-profile, 50 mm height, 35 mm width, 4 mm web, for furniture reinforcement. Classed in HTS 7216.10.0050 as other I-sections <80 mm, extruded, no further working. Matches chapter notes for iron/nonalloy.