Hot-Rolled U-Channel 75x50x5 mm
A hot-rolled U-section made from nonalloy steel, measuring 75 mm in height and 50 mm in width with 5 mm thickness, used in light structural framing. It falls under HTS 7216.10.0050 as a U-section not further worked than hot-rolled, with height less than 80 mm, and classified as 'other' within this subheading. Nonalloy steel composition ensures placement in heading 7216.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If further worked with polishing or coating
Any surface treatment beyond hot-rolling constitutes 'further worked' per Chapter 72 notes, moving to 7216.21.
If made from alloy steel
Alloy steel sections (with specified alloy elements exceeding nonalloy limits) fall under Chapter 72 heading 7228.
If imported as fabricated structures or assemblies
Assembled frames or built-up structures from these sections are classified by function in Chapter 73, not as primary shapes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify exact dimensions and confirm height under 80 mm with mill certificates to avoid reclassification to higher height sections
• Provide chemical composition analysis proving nonalloy steel (under 10% alloying elements) as per Chapter 72 notes
• Inspect for any further working like polishing or coating, which would shift to 7216.91 and alter duty rates
Related Products under HTS 7216.10.00.50
Hot-Rolled I-Beam 65x40x4.5 mm
Hot-rolled I-section of nonalloy steel, 65 mm height, 40 mm flange width, and 4.5 mm web thickness, suitable for small building supports. Classified under HTS 7216.10.0050 for I-sections under 80 mm height, hot-rolled without further working, in the 'other' category. Excludes any alloying per Chapter 72 definitions.
Extruded H-Section 70x50x6 mm
Extruded H-profile from nonalloy steel, 70 mm height, 50 mm width, 6 mm thickness, used in machinery framing. Fits HTS 7216.10.0050 as H-sections under 80 mm, not further worked than extruded, 'other' subheading. Adheres to nonalloy steel per Chapter 72.
Hot-Drawn U-Profile 60x45x5 mm
Hot-drawn U-section nonalloy steel bar, 60 mm height, 45 mm width, 5 mm flange, for lightweight construction. Under HTS 7216.10.0050 for U-sections <80 mm, hot-drawn without further working, other category. Nonalloy per chapter definitions.
Hot-Rolled H-Bar 78x55x7 mm
Hot-rolled H-section nonalloy steel, 78 mm height, 55 mm flange, 7 mm thickness, for temporary supports. HTS 7216.10.0050 applies to H-sections <80 mm, hot-rolled, other. Strictly nonalloy and not further worked.
Extruded I-Section 50x35x4 mm
Extruded nonalloy steel I-profile, 50 mm height, 35 mm width, 4 mm web, for furniture reinforcement. Classed in HTS 7216.10.0050 as other I-sections <80 mm, extruded, no further working. Matches chapter notes for iron/nonalloy.
Hot-Rolled U-Section 40x25x3 mm
Small hot-rolled U-channel nonalloy steel, 40 mm height, 25 mm width, 3 mm thick, ideal for shelving tracks. HTS 7216.10.0050 for U <80 mm, hot-rolled, other. No alloy elements exceeding limits.