Cold-Drawn 0.42% Carbon Steel Anchor Rod Stock 160 mm
Cold-drawn nonalloy steel anchor rod stock with 0.42% carbon, 160 mm diameter for foundation anchoring systems. Classifies under 7215.50.0063: cold-finished, proper carbon range, 76-228 mm dimension. Machined to threads after import.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If imported already threaded
Threaded rods classified as finished fasteners in 7318
If hot-rolled concrete reinforcing type
Deformed reinforcing bars always in 7214 per note
If fabricated into structural anchor assemblies
Fabricated steel structures in Chapter 73
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Distinguish raw stock from threaded rods; certify no alloying elements; document intended anchor rod fabrication
Related Products under HTS 7215.50.00.63
Cold-Finished 0.5% Carbon Steel Shaft 100 mm Diameter
A cold-finished round bar of nonalloy steel containing 0.45% carbon by weight, with a 100 mm diameter cross-section, used in heavy machinery shafts. Classified under HTS 7215.50.0063 due to its cold-formed finish, carbon content between 0.25-0.6%, and diameter 76-228 mm. Not further worked beyond cold-finishing per chapter notes.
Cold-Formed 0.4% Carbon Steel Round Bar 150 mm
Cold-formed nonalloy steel bar with 0.4% carbon content and 150 mm diameter, supplied for structural fabrication. Meets HTS 7215.50.0063 criteria: cold-formed finish only, specified carbon range, and cross-section 76-228 mm. Used in bridge and building construction components.
Cold-Finished Medium Carbon Steel Piston Rod 80 mm
Precision cold-finished nonalloy steel rod with 0.35% carbon for hydraulic piston applications, 80 mm diameter. Falls under 7215.50.0063 as cold-formed/cold-finished, 0.25-0.6% carbon, 76-228 mm range. Surface finish optimized for hydraulic cylinder use.
0.55% Carbon Cold-Drawn Steel Bar 200 mm Diameter
Heavy cold-drawn nonalloy steel bar containing 0.55% carbon, 200 mm cross-section for forging stock or heavy axles. HTS 7215.50.0063 applies: cold-finished process, carbon 0.25-0.6%, diameter within specified range. Not further worked per chapter definition.
Cold-Rolled 0.3% Carbon Steel Billet 120 mm Round
Cold-rolled nonalloy steel round with 0.3% carbon content, 120 mm diameter, used as forging or machining stock. Classified 7215.50.0063 for cold-finished condition, medium carbon range, and proper size range. Provides improved surface and tolerance vs hot-rolled.
Medium Carbon Cold-Finished Construction Bar 90 mm
Cold-finished nonalloy steel bar, 0.45% carbon, 90 mm diameter for heavy construction equipment pins/bushings. HTS 7215.50.0063: cold-formed, 0.25-0.6% C, 76-228 mm range. Enhanced machinability from cold finishing.