Cold-Rolled 0.3% Carbon Steel Billet 120 mm Round
Cold-rolled nonalloy steel round with 0.3% carbon content, 120 mm diameter, used as forging or machining stock. Classified 7215.50.0063 for cold-finished condition, medium carbon range, and proper size range. Provides improved surface and tolerance vs hot-rolled.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If hot-rolled with rectangular pattern
Hot-rolled concrete reinforcing bars in 7214.91
If tool steel alloy composition per note (e)
Tool steels classified separately regardless of form
If machined as engine parts before import
Further worked/machined parts classified by end use
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Distinguish cold-rolled from polished (further worked); declare heat number traceability; watch for accidental alloy classification
Related Products under HTS 7215.50.00.63
Cold-Finished 0.5% Carbon Steel Shaft 100 mm Diameter
A cold-finished round bar of nonalloy steel containing 0.45% carbon by weight, with a 100 mm diameter cross-section, used in heavy machinery shafts. Classified under HTS 7215.50.0063 due to its cold-formed finish, carbon content between 0.25-0.6%, and diameter 76-228 mm. Not further worked beyond cold-finishing per chapter notes.
Cold-Formed 0.4% Carbon Steel Round Bar 150 mm
Cold-formed nonalloy steel bar with 0.4% carbon content and 150 mm diameter, supplied for structural fabrication. Meets HTS 7215.50.0063 criteria: cold-formed finish only, specified carbon range, and cross-section 76-228 mm. Used in bridge and building construction components.
Cold-Finished Medium Carbon Steel Piston Rod 80 mm
Precision cold-finished nonalloy steel rod with 0.35% carbon for hydraulic piston applications, 80 mm diameter. Falls under 7215.50.0063 as cold-formed/cold-finished, 0.25-0.6% carbon, 76-228 mm range. Surface finish optimized for hydraulic cylinder use.
0.55% Carbon Cold-Drawn Steel Bar 200 mm Diameter
Heavy cold-drawn nonalloy steel bar containing 0.55% carbon, 200 mm cross-section for forging stock or heavy axles. HTS 7215.50.0063 applies: cold-finished process, carbon 0.25-0.6%, diameter within specified range. Not further worked per chapter definition.
Medium Carbon Cold-Finished Construction Bar 90 mm
Cold-finished nonalloy steel bar, 0.45% carbon, 90 mm diameter for heavy construction equipment pins/bushings. HTS 7215.50.0063: cold-formed, 0.25-0.6% C, 76-228 mm range. Enhanced machinability from cold finishing.
0.25% Carbon Cold-Formed Heavy Shafting Stock 180 mm
Minimum 0.25% carbon nonalloy steel, cold-formed to 180 mm diameter for large turbine shafting stock. Precisely HTS 7215.50.0063: boundary carbon content, cold-finished, specified diameter range. Critical straightness tolerance from cold processing.