Hot-Rolled Low-Carbon Rectangular Steel Billets 100x50mm
Hot-rolled billets of nonalloy steel with rectangular cross-section measuring 100mm x 50mm (maximum 100mm), containing less than 0.25% carbon. These are not further worked beyond hot-rolling and used primarily for forging or further processing into structural components. Classified under HTS 7214.91.0016 due to rectangular shape, low carbon content, and max cross-section under 152mm.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If containing indentations, ribs or deformations from rolling
Products with concrete reinforcing deformations classify under 7213.91 as concrete reinforcing bars/rods per Chapter 72 note (c).
If containing 0.25% or more carbon by weight
Carbon content threshold determines subheading; >=0.25% carbon moves to other low-carbon excluded rectangular bars.
If further worked with polishing, coating, or painting
Chapter 72 note defines 'further worked' surface treatments that shift classification from 7214 to 7215.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify carbon content certification below 0.25% via mill test reports; measure maximum cross-sectional dimension precisely under 152mm; check Section 232 tariffs and steel quota applicability for nonalloy products
Related Products under HTS 7214.91.00.16
Forged Hot-Drawn Rectangular Steel Bar 80x40mm A36 Grade
A36 grade nonalloy steel bar, rectangular 80mm x 40mm cross-section, produced by forging and hot-drawing with <0.25% carbon. Supplied in straight lengths for machining into brackets and supports. Meets HTS 7214.91.0016 as other bars not further worked, rectangular non-square, low carbon, max dimension <152mm.
Hot-Extruded Low-Carbon Steel Flat Bar 120x25mm
Hot-extruded rectangular flat bar of nonalloy steel (<0.25% C), 120mm width x 25mm thickness for maximum cross-section compliance under 152mm. Used in machinery bases and frames. Fits HTS 7214.91.0016: rectangular cross-section, not further worked than hot-extruded, low carbon content.
Hot-Rolled S275JR Rectangular Steel Rod 90x30mm
S275JR structural grade nonalloy steel hot-rolled into rectangular 90x30mm profile (<152mm max), <0.25% carbon max. For welded frames and supports. HTS 7214.91.0016 applies to these forged/hot-rolled rectangular low-carbon bars not further worked.
Low-Carbon Hot-Forged Steel Block 140x45mm
Nonalloy steel block hot-forged to rectangular 140mm x 45mm cross-section (<152mm max dimension), carbon <0.25%. Supplied for drop forging dies and fixtures. Precisely matches HTS 7214.91.0016 criteria for rectangular low-carbon bars not further worked.
Hot-Drawn Mild Steel Rectangular Bar 110x35mm
Mild steel (nonalloy, <0.25% C) rectangular bar hot-drawn to 110mm x 35mm, maximum cross-section 110mm <152mm limit. For general fabrication and repairs. Classifies in HTS 7214.91.0016 as low-carbon rectangular hot-worked bar, no further processing.
ASTM A283 Grade C Hot-Rolled Rectangular Steel 75x60mm
ASTM A283C nonalloy steel hot-rolled rectangular bar 75mm x 60mm (max 75mm <152mm), guaranteed <0.25% max carbon. Pressure vessel and plate alternative material. HTS 7214.91.0016: rectangular low-carbon, hot-rolled, not further worked.