ASTM A283 Grade C Hot-Rolled Rectangular Steel 75x60mm
ASTM A283C nonalloy steel hot-rolled rectangular bar 75mm x 60mm (max 75mm <152mm), guaranteed <0.25% max carbon. Pressure vessel and plate alternative material. HTS 7214.91.0016: rectangular low-carbon, hot-rolled, not further worked.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If circular cross-section with rolling deformations
Deformed round bars for concrete use classify under 7213 concrete reinforcing regardless of carbon.
If burnished, phosphatized, or chemically treated surface
Surface treatments listed in Chapter 72 note constitute 'further worked' status for 7215 classification.
If considered flat-rolled product of width/thickness ratio
Width >=150mm and specific aspect ratios may classify as flat-rolled under 7208 rather than bars.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide ASTM material test certificate; document hot-rolling only (no cold-finishing); check vessel-specific import regs if end-use declared
Related Products under HTS 7214.91.00.16
Hot-Rolled Low-Carbon Rectangular Steel Billets 100x50mm
Hot-rolled billets of nonalloy steel with rectangular cross-section measuring 100mm x 50mm (maximum 100mm), containing less than 0.25% carbon. These are not further worked beyond hot-rolling and used primarily for forging or further processing into structural components. Classified under HTS 7214.91.0016 due to rectangular shape, low carbon content, and max cross-section under 152mm.
Forged Hot-Drawn Rectangular Steel Bar 80x40mm A36 Grade
A36 grade nonalloy steel bar, rectangular 80mm x 40mm cross-section, produced by forging and hot-drawing with <0.25% carbon. Supplied in straight lengths for machining into brackets and supports. Meets HTS 7214.91.0016 as other bars not further worked, rectangular non-square, low carbon, max dimension <152mm.
Hot-Extruded Low-Carbon Steel Flat Bar 120x25mm
Hot-extruded rectangular flat bar of nonalloy steel (<0.25% C), 120mm width x 25mm thickness for maximum cross-section compliance under 152mm. Used in machinery bases and frames. Fits HTS 7214.91.0016: rectangular cross-section, not further worked than hot-extruded, low carbon content.
Hot-Rolled S275JR Rectangular Steel Rod 90x30mm
S275JR structural grade nonalloy steel hot-rolled into rectangular 90x30mm profile (<152mm max), <0.25% carbon max. For welded frames and supports. HTS 7214.91.0016 applies to these forged/hot-rolled rectangular low-carbon bars not further worked.
Low-Carbon Hot-Forged Steel Block 140x45mm
Nonalloy steel block hot-forged to rectangular 140mm x 45mm cross-section (<152mm max dimension), carbon <0.25%. Supplied for drop forging dies and fixtures. Precisely matches HTS 7214.91.0016 criteria for rectangular low-carbon bars not further worked.
Hot-Drawn Mild Steel Rectangular Bar 110x35mm
Mild steel (nonalloy, <0.25% C) rectangular bar hot-drawn to 110mm x 35mm, maximum cross-section 110mm <152mm limit. For general fabrication and repairs. Classifies in HTS 7214.91.0016 as low-carbon rectangular hot-worked bar, no further processing.