Construction Cold-Rolled Nonalloy Steel Coil
2.0 mm x 1100 mm cold-rolled steel coil for building flashings and trims. HTS 7209.16.00.91: cold-rolled flat products in coils, 1-3 mm thick, >600 mm wide, nonalloy, not further worked, other category. Construction standard.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If hot-rolled equivalent
Processing temp (hot vs cold) primary classification factor.
If cold-rolled but coated
Coatings disqualify from uncoated 7209/10 base headings.
If clad with other metal
Cladding explicitly stated as exclusion from 7209.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide rolling mill details confirming cold-reduction process
• No duty allowance for rust/discoloration per chapter note
• Segment entries by end-use if mixed (construction vs auto)
Related Products under HTS 7209.16.00.91
Cold-Rolled Nonalloy Steel Coil for Automotive Panels
Flat-rolled nonalloy steel coil, cold-rolled to a thickness of 1.5 mm and width over 600 mm, used for manufacturing car body panels. It falls under HTS 7209.16.00.91 as cold-rolled, not further worked, in coils, thickness between 1-3 mm, and not meeting high-strength steel criteria. This classification applies to standard nonalloy steel products without alloying elements exceeding defined thresholds.
Cold-Rolled Steel Coil for Household Appliance Casings
Cold-rolled nonalloy steel coil, 2 mm thick and 800 mm wide, designed for refrigerator and washer outer casings. Classified under HTS 7209.16.00.91 due to its cold-rolled state in coils, thickness 1-3 mm, width ≥600 mm, and absence of cladding, plating, or alloy specifications. Meets 'other' category as standard commercial grade.
Commercial Cold-Rolled Steel Coil for Furniture Frames
1.8 mm thick cold-rolled nonalloy steel coil, width 650 mm, for metal furniture framing. Fits HTS 7209.16.00.91 as flat-rolled, coil form, cold-reduced without further working, specific thickness range, and nonalloy per U.S. note definitions. Standard grade without high-strength yield points.
Cold-Rolled Nonalloy Steel for HVAC Ducting
2.2 mm thick, 1000 mm wide cold-rolled steel coil for heating/ventilation duct fabrication. Under HTS 7209.16.00.91 for cold-rolled coils not further worked, nonalloy, thickness 1-3 mm, width exceeding 600 mm, 'other' specification. Excludes specialized steels like razor blade or tool steel.
Standard Cold-Rolled Steel Coil for Shelving
1.2 mm cold-rolled nonalloy steel coil, 700 mm wide, for retail shelving units. Classified in HTS 7209.16.00.91 as 'other' cold-rolled coil products of iron/nonalloy steel, thickness >1<3 mm, not clad/plated/coated, without further working. Common commercial grade.
Cold-Rolled Steel Coil for Metal Roofing
2.5 mm thick cold-rolled nonalloy steel coil, 900 mm wide, base material for corrugated roofing sheets. HTS 7209.16.00.91 applies to this uncoated, unclad, cold-rolled coil of specified dimensions without further working or special steel properties. Standard construction grade.