Unpickled Hot-Rolled Steel Coil Mill Edge 1.2mm
Unpickled hot-rolled nonalloy steel coil showing scale, 1.2 mm thick with characteristic untrimmed mill edges, width 800 mm. The absence of pickling keeps surface as-rolled, fitting HTS 7208.39.0030 for thinnest hot-rolled coil category with untrimmed edges.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If high-strength steel specs
US Note (a) high-strength variants have dedicated subheading
If bars/rods with deformations
Concrete reinforcing per US Note (c) classifies differently from flat-rolled
If stainless alloy
Stainless compositions exclude from nonalloy iron/steel headings
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document scale/rust as acceptable per Chapter note denying discoloration allowances
• Confirm carbon content <0.6% typical for nonalloy classification
• Measure uncoiled sample width to validate >600 mm criterion
Related Products under HTS 7208.39.00.30
Hot-Rolled Mild Steel Coil with Mill Edges 1.5mm Thick
This is a flat-rolled product of nonalloy steel, hot-rolled in coils, with a thickness of 1.5 mm and width exceeding 600 mm, featuring untrimmed mill edges directly from the rolling process. It falls under HTS 7208.39.0030 because it is not clad, plated, or coated, not further worked beyond hot-rolling, and specifically has untrimmed edges. Commonly used as feedstock for further processing into sheets or structural components.
HRPO Steel Coil Mill Edge 2.2mm
Hot-rolled pickled and oiled (HRPO) nonalloy steel coil with untrimmed edges, 2.2 mm thick and over 600 mm wide, supplied in coil form. Although pickled, it remains classified under hot-rolled not further worked per Chapter 72 notes, as pickling doesn't constitute 'further working.' The untrimmed mill edges distinguish it under HTS 7208.39.0030 for applications in automotive panels.
Nonalloy Steel Hot Band Coil 1.8mm Untrimmed
Hot band coil of nonalloy steel, 1.8 mm thickness, wide format (>600 mm), retaining rough mill edges from rolling. This semi-finished product is not further worked than hot-rolled and fits HTS 7208.39.0030 precisely due to untrimmed edges and specs. Ideal for slitting into narrower sheets for construction.
Mill Edge Low Carbon Steel Coil 2.0mm for Stamping
Low carbon nonalloy steel hot-rolled coil with mill edges, 2.0 mm thick, coil width 1000 mm, for press stamping applications. Untrimmed edges and lack of cladding/coating place it squarely in HTS 7208.39.0030 as hot-rolled, not further worked flat product.
Drawing Quality Hot-Rolled Coil Mill Edge 1.9mm
Drawing quality (DQ) nonalloy steel hot-rolled in coil form, 1.9 mm gauge, untrimmed edges, suitable for deep drawing operations. Meets all criteria for HTS 7208.39.0030: hot-rolled, not further worked, <3 mm thick, wide coil with mill edges.
Commercial Quality HR Steel Coil Untrimmed 2.5mm
Commercial quality hot-rolled nonalloy steel coil, 2.5 mm thick, featuring authentic mill edges, coil width 1500 mm. Classified under HTS 7208.39.0030 for its unprocessed hot-rolled state, no cladding or further surface treatments.