High-Strength Hot-Rolled Steel Coil HR450
Flat-rolled nonalloy steel coil, 3.5 mm thick and 1,200 mm wide, with minimum yield strength of 355 MPa, meeting high-strength steel definition per US note 72(a). Hot-rolled, in coils, not further worked, classified under 7208.38.0015 due to thickness between 3-4.75 mm. Used in structural automotive and machinery applications requiring enhanced strength.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness under 3 mm
Thinner high-strength steel shifts to 7208.36 for products less than 3 mm thick while maintaining yield strength criteria.
If not in coils
Cut-to-length high-strength steel plates of same specs fall under 7211.14, as 7208 covers only coiled products.
If alloy steel composition
Products with alloying elements exceeding nonalloy limits move to Chapter 72 alloy steel headings like 7225.30.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify minimum yield strength of 355 MPa at entry with mill test reports; declare exact thickness to avoid reclassification; watch for Section 232 steel tariffs requiring additional quotas or duties
Related Products under HTS 7208.38.00.15
355 Yield High-Strength Machinery Steel Coil
Generic 355 MPa yield hot-rolled steel coil for industrial machinery, 3.3 mm gauge, 1,100 mm width, nonalloy high-strength per US note. Classifies 7208.38.0015 as hot-rolled coils 3-4.75 mm. Base material for frames and guards.
SM490A High-Strength Steel Coil
JIS G3106 SM490A hot-rolled coil, 4.1 mm thick, 1,550 mm wide, minimum yield 355 MPa qualifying high-strength steel. Meets 7208.38.0015 for non-worked hot-rolled coils. For Japanese building and welding applications.
High-Strength Steel Coil 3.5mm for Bridges
3.5 mm thick high-strength steel coil (yield 365 MPa), 1,250 mm wide, hot-rolled nonalloy for bridge fabrication. Precisely HTS 7208.38.0015 due to thickness and strength specs, in coils. Supports infrastructure durability.
E355C High-Strength Steel Coil
EN 10210 E355C hot-rolled coil, 3.7 mm thickness, 1,200 mm width, 355 MPa yield high-strength steel. 7208.38.0015 for uncoated hot-rolled coils in thickness range. Pipe manufacturing feedstock.
Grade 50W Weathering Steel Coil
ASTM A588 Grade 50W high-strength weathering steel coil, 4.4 mm thick, 1,500 mm wide, yield 345+ MPa but qualifies via strength specs. Hot-rolled coils 7208.38.0015 despite weathering elements if nonalloy base. For corrosion-resistant structures.
460 MPa High-Strength Steel Coil
Ultra-high-strength 460 MPa yield hot-rolled steel coil, 3.2 mm thick, 1,650 mm wide, nonalloy meeting US high-strength note. 7208.38.0015 classification for precise thickness/hot-rolled coils. Advanced engineering applications.